Privacy choices

Choose what we may use.

The site works without optional tracking. Your choice is saved on this device and can be changed here anytime.

Necessary

Runs the site, protects forms, and remembers this privacy choice.

Always on

Exterior cost statistics

Commercial Roof Replacement Cost per Square Foot 2026: Exterior Benchmarks

Price the scope before multiplying the square footage. Compare published roof budgets, manufacturer ranges and public bid prices, with PorchRocket's calculations and source records.

The short answer

Published commercial roof replacement references in this analysis have a $14 per square foot source-center median and a $12.67 to $16.56 interquartile range. The three inputs are a 2026 manufacturer range, a 2025 county award and a 2025 university construction budget. These are reference values rather than a national survey of installed projects. Compare tear-off, insulation and flashing scope before applying a rate to measured roof area; coating and pavement work use separate benchmarks below.

Price my territory

What matters most

  • PorchRocket's three-source roof replacement comparison has a $14 per square foot median, with each source counted once.
  • FDOT's October 2026 reports produce a $144.15 per ton median across 10 market-area averages for one asphalt pay item.
  • The parking-space paint comparison has a $1.32 per linear foot median across three FDOT market reports, for a six-inch white stripe.
  • The 2025 snow and tower statistics describe bids on named public projects; their site-specific prices stay separate from national reference ranges.
  • Ground Control costs $10 to $20 per matched commercial building, before optional owner and decision-maker research.

Commercial roof replacement runs $8 to $20 per square foot in ArmorThane’s published 2026 reference. That range describes full tear-off and replacement. A coating bid, an asphalt price per ton and a seasonal grounds contract each buy different work, so a low unit price can send an exterior budget in the wrong direction before anyone measures the building.

Updated November 2026. PorchRocket calculated the medians and quartiles below from public source files, retaining the pricing basis attached to each record. Use the cost tables alongside our commercial building statistics, then choose the property size and service scope worth pursuing through Ground Control by PorchRocket. The downloadable data carries the source and method for each calculation.

Key statistics

PorchRocket’s November 2026 analysis reports 24 figures from manufacturer publications and public procurement records. Every statistic names its source year and cost unit.

  • ArmorThane’s 2026 manufacturer guide lists full commercial roof tear-off and replacement at $8 to $20 per square foot.
  • PorchRocket’s analysis of Cumberland County’s December 2025 award produces approximately $11.35 per square foot for its Agricultural Center roof replacement.
  • PorchRocket’s analysis of the University of South Carolina’s 2025 construction budget produces $17.65 to $20.59 per square foot for its 300 Main Street roof project.
  • PorchRocket’s analysis of ArmorThane’s 2026 range, Cumberland County’s 2025 award and the University of South Carolina’s 2025 budget yields a $14 per square foot roof replacement median across three source centers.
  • PorchRocket’s analysis of ArmorThane’s 2026 range, Cumberland County’s 2025 award and the University of South Carolina’s 2025 budget yields a $12.67 to $16.56 per square foot roof replacement interquartile range across three source centers.
  • ArmorThane’s 2026 guide publishes installed silicone roof coating at $2.50 to $5.50 per square foot.
  • PorchRocket’s analysis of Bastrop’s October 2025 coating resolution produces approximately $3.67 per square foot for a silicone-restoration package including fixed access ladders.
  • Asphalt Kingdom’s February 2025 publication lists sealcoating at $0.15 to $0.35 per square foot.
  • PorchRocket’s analysis of Asphalt Kingdom’s 2025 range and SealMaster’s undated range produces a $0.225 per square foot sealcoating median across two source midpoints, checked in November 2026.
  • PorchRocket’s analysis of FDOT’s October 2026 reports finds a $144.15 per ton median across 10 market-area averages for asphalt item 0334-1-13.
  • PorchRocket’s analysis of FDOT’s October 2026 reports finds a $125.70 to $179.68 per ton interquartile range across 10 market-area averages for asphalt item 0334-1-13.
  • FDOT’s October 2026 statewide report publishes a $134.69 per ton quantity-weighted average for asphalt item 0334-1-13 across 82 contracts.
  • PorchRocket’s analysis of FDOT’s October 2026 reports finds a $2.40 per square yard median across 13 market-area averages for two-inch milling item 0327-70-5.
  • PorchRocket’s analysis of FDOT’s October 2026 reports finds a $1.87 to $3.54 per square yard interquartile range across 13 market-area averages for two-inch milling item 0327-70-5.
  • PorchRocket’s analysis of FDOT’s October 2026 reports finds a $1.32 per linear foot median across three market-area averages for six-inch white parking-space paint, item 0710-11121.
  • PorchRocket’s analysis of FDOT’s October 2026 reports finds a $1.15 to $2.66 per linear foot interquartile range across three market-area averages for six-inch white parking-space paint, item 0710-11121.
  • PorchRocket’s analysis of FDOT’s October 2026 reports finds a $2.88 per linear foot median across five market-area averages for six-inch white parking-space thermoplastic, item 0711-11121.
  • PorchRocket’s analysis of FDOT’s October 2026 reports finds a $38.67 per acre-cycle median across 13 market-area averages for mowing item 0107-2.
  • PorchRocket’s analysis of FDOT’s October 2026 reports finds a $7.53 to $62.60 per acre-cycle interquartile range across 13 market-area averages for mowing item 0107-2.
  • PorchRocket’s analysis of Charlotte County’s November 2025 bid tab finds a $45 per acre-cycle median across three submitted mowing prices.
  • PorchRocket’s analysis of Bloomfield Township Public Library’s February 2025 proposals finds a $295 per push median across three plowing prices applicable at a two-inch snowfall.
  • PorchRocket’s analysis of Bloomfield Township Public Library’s February 2025 proposals finds a $280 to $585 per push interquartile range across three plowing prices applicable at a two-inch snowfall.
  • PorchRocket’s analysis of Salina’s October 2025 bid tab finds a $226,080 median across seven submitted prices for the Section 902 water tower painting scope.
  • PorchRocket’s analysis of Salina’s October 2025 bid tab finds a $217,760 to $322,600 interquartile range across seven submitted Section 902 water tower painting prices, excluding the engineer estimate and separate maintenance line.

Commercial exterior cost benchmarks by scope

The $14 roof reference median and $1.32 parking-paint median describe different populations; the sample column identifies what PorchRocket counted for each exterior service.

A source center is the midpoint of a published range, or the normalized rate when the source gives one project amount. The middle-half column is the interquartile range, from the 25th to the 75th percentile. For FDOT, observations are market-area averages. For snow and tower work, observations are submitted prices on one project.

Work and unit Observations Median Middle half Evidence
Roof replacement, dollars per roof square foot 3 source centers $14.00 $12.67 to $16.56 Manufacturer, county award, university budget
Silicone restoration references, dollars per roof square foot 2 source centers; one includes ladders $3.84 $3.75 to $3.92 Manufacturer, Bastrop package
Sealcoating, dollars per paved square foot 2 supplier midpoints; one undated $0.225 $0.2125 to $0.2375 SealMaster, 2025 supplier publication
Asphalt item 0334-1-13, dollars per ton 10 market reports $144.15 $125.70 to $179.68 FDOT, October 2026
Two-inch milling, dollars per square yard 13 market reports $2.40 $1.87 to $3.54 FDOT, October 2026
Six-inch parking-space paint, dollars per linear foot 3 market reports $1.32 $1.15 to $2.66 FDOT, October 2026
Six-inch parking-space thermoplastic, dollars per linear foot 5 market reports $2.88 $2.27 to $3.83 FDOT, October 2026
Mowing, dollars per acre-cycle 13 market reports $38.67 $7.53 to $62.60 FDOT, October 2026
Library plowing at two inches, dollars per push 3 submitted prices at one site $295 $280 to $585 Library, February 2025
Water tower painting scope, lump sum 7 submitted prices at one project $226,080 $217,760 to $322,600 Salina, October 2025
Fabric building re-cover No comparable unit-price series established Not calculated Not calculated Manufacturer’s 2025 catalog

The narrow silicone middle half comes from two selected reference centers, including a bundled project. It does not narrow the manufacturer’s $2.50 to $5.50 installed range to a dependable local quoting band. I would use the published outer range for early budgeting, then replace it with a written scope and local proposals.

Commercial roof replacement cost per square foot in 2026

For initial budgeting in November 2026, the manufacturer’s $8 to $20 per square foot range brackets a broad replacement scope; PorchRocket’s three-source center median is $14.

The underlying references explain the spread better than the median alone:

Published reference Original figures Normalized rate Pricing basis
ArmorThane, 2026 $8 to $20 per square foot $14 midpoint Manufacturer’s full tear-off replacement estimate
Cumberland County, December 2025 $142,712 for approximately 12,579 square feet $142,712 / 12,579 = $11.35 Award for low-slope removal and replacement
University of South Carolina, July 2025 $1.2 million to $1.4 million for approximately 68,000 square feet $17.65 to $20.59; $19.12 midpoint Prequalification construction budget for a roof with several existing system types

Each source supplies one center to the calculation. Sorting the unrounded centers gives approximately $11.35, $14 and $19.12. Their median is $14; linear interpolation produces the $12.67 to $16.56 middle half. Mixing a budget and an award is acceptable for this reference comparison only because their status remains attached to the figures.

Write the assembly first. Before an estimator puts a square-foot rate on a roof, I would ask for a scope that identifies the membrane with its attachment method, describes the existing layers to remove, sets the insulation allowance and shows how deck repairs or curb flashing will be paid.

Use measured roof area for the multiplication. A building-size band helps choose prospects, while the roofing quantity must come from the roof takeoff. A warehouse with several roof sections needs those sections identified before a salesperson applies one blended rate to the address.

The following planning table applies the manufacturer’s $8 and $20 endpoints and the calculated $14 reference center, holding unit rates constant to isolate size:

Measured roof area At $8 per square foot At $14 per square foot At $20 per square foot
12,500 square feet $100,000 $175,000 $250,000
38,600 square feet $308,800 $540,400 $772,000
64,000 square feet $512,000 $896,000 $1,280,000

For prospecting, that size difference changes the job you are trying to earn. A crew seeking larger replacement packages can begin with commercial roof lists filtered by material and roof age band, with a building-size floor. Our commercial roofing prospecting guide explains the account-selection work before a roof survey is scheduled.

I would keep a separate column for the basis of every local number: budget, submitted proposal, award or final invoiced amount. An owner’s reserved budget answers a different question from an estimator’s bid. Store the quantities and exclusions with the amount so the next comparison starts with the same assembly.

Roof coating cost per square foot

ArmorThane’s 2026 installed silicone range is $2.50 to $5.50 per square foot; a separate Bastrop restoration package normalizes to approximately $3.67 including access ladders.

The Bastrop resolution identifies approximately 32,000 square feet of standing-seam metal roof, cleaning and preparation, flashing and seam treatment, and fixed ladders. Its arithmetic is $117,510 / 32,000 = $3.6721875 per square foot. The resolution does not split out the ladder cost, so the normalized figure remains a package rate.

PorchRocket takes the $4 midpoint of the manufacturer’s silicone range and the unrounded Bastrop rate as two reference centers. Their median is $3.84 after rounding, with quartiles of $3.75 and $3.92. Use the published range for the first allowance and ask the contractor to price the required system.

On the planning table’s 38,600-square-foot roof, applying $2.50 and $5.50 produces $96,500 to $212,300. The replacement scenarios on that same area run $308,800 to $772,000. The decision between them starts with the substrate assessment; changing the price column does not establish that coating is suitable.

For a coating estimate, I would ask the bidder to separate cleaning from repairs, specify the primer and seam treatment, state the application rate with its dry film thickness, and identify how wet-area replacement, roof access and protection around occupied entrances were priced. Keep the quantities beside their prices.

A salesperson can begin with older roofs to assess for coating. The inspection then answers the coating question. An older roof, a visible patch or ponding marks gives the salesperson a reason to offer an assessment; the coating scope comes from the roof review and the chosen manufacturer’s requirements.

Compare the expected ownership period with the proposed system’s maintenance plan, too. Our building-system service-life reference handles published life figures separately from this cost page. I would keep the warranty term beside its inspection duties and future recoat work instead of treating the cheapest first application as the full ownership budget.

Sealcoating cost per square foot

The two supplier references span $0.10 to $0.35 per paved square foot, with a $0.225 median of source midpoints in this November 2026 compilation.

SealMaster’s cost FAQ publishes $0.10 to $0.30 per square foot. Asphalt Kingdom’s February 2025 article publishes $0.15 to $0.35. The SealMaster page is undated, so the compilation date does not make it a newly issued 2026 price schedule.

The midpoint calculation is (($0.10 + $0.30) / 2 + ($0.15 + $0.35) / 2) / 2 = $0.225. The $0.2125 to $0.2375 middle half describes those two midpoints. Retain the wider published ranges when setting an early allowance.

Say a property has 47,000 measured square feet of asphalt to seal. Applying the combined reference endpoints and midpoint produces the following surface-treatment amounts:

Assumed sealer rate Arithmetic Surface-treatment amount
$0.10 per square foot 47,000 x $0.10 $4,700
$0.225 per square foot 47,000 x $0.225 $10,575
$0.35 per square foot 47,000 x $0.35 $16,450

Source rates: SealMaster and Asphalt Kingdom; area is the stated illustration. Repairs and restriping need their own scope. A full proposal should say how many coats are included and how the lot will be divided for access.

When an owner compares two sealcoating proposals, I would want crack filling measured in the takeoff, patching shown with its own quantity, and oil-spot treatment and surface cleaning identified so the buyer can check the same repair allowances without guessing which bidder buried them in a surface rate.

For a first campaign, select properties with paved parking areas, then measure the asphalt during takeoff or the site visit. Ground Control supplies the property fit. Your estimator supplies the paving quantity. The parking-lot sealcoating prospecting guide connects that process to owners and property managers in a service area.

Asphalt overlay cost per square yard

PorchRocket’s worked two-inch overlay conversion is $15.68 per square yard for the selected asphalt line, using a $144.15 per ton market-reference median and stated density.

The input is FDOT item 0334-1-13, Superpave asphaltic concrete, traffic C. This analysis uses identical item codes across the October 26, 2026 market-area reports, covering October 1, 2025 through September 30, 2026. Ten of the 14 reports contain that item. Missing rows stay missing.

The table preserves agency market-area codes so each number can be found in the corresponding download. Milling is item 0327-70-5, at two inches average depth. Mowing is item 0107-2. Each figure is the agency’s published quantity-weighted average inside that market report.

FDOT market area Asphalt, dollars per ton Two-inch milling, dollars per square yard Mowing, dollars per acre-cycle Source reports
01 Not reported $1.87 $29.53 FDOT area 01
02 Not reported $0.76 $7.53 FDOT area 02
03 Not reported $1.83 $40.53 FDOT area 03
04 $178.01 $1.75 $57.55 FDOT area 04
05 $108.62 $3.40 $81.66 FDOT area 05
06 $120.78 $1.95 $72.05 FDOT area 06
07 $122.42 $2.22 $24.00 FDOT area 07
08 $143.18 $2.40 $62.60 FDOT area 08
09 $135.55 $3.54 $3.03 FDOT area 09
10 $145.12 $12.76 $63.44 FDOT area 10
11 $215.00 $2.70 $38.67 FDOT area 11
12 $180.24 $6.16 $5.63 FDOT area 12
13 $233.79 $4.77 $6.93 FDOT area 13
14 Not reported Not reported Not reported FDOT area 14

The CSV contains each workbook’s direct URL and the selected pay-item identifier. These rows compare the same asphalt item, while the overall contract can contain other work. They should not be read as finished parking-lot overlay quotes.

For the unit conversion, assume a two-inch compacted lift and 145 pounds per cubic foot. Those are design inputs for the example. One square yard contains nine square feet, and the calculation uses 2,000 pounds per U.S. short ton:

Tons per square yard = 9 x (2 / 12) x 145 / 2,000 = 0.10875.

Then $144.15 x 0.10875 = $15.68 per square yard, rounded. Applying the market-price quartiles gives $13.67 to $19.54 per square yard for that asphalt line. Adding the $2.40 median milling line produces $18.08 per square yard before other job components.

Check the payment scope before adding costs to the asphalt reference. FDOT’s FY 2026 to 2027 specifications, Section 300-11, treat prime and tack coat work as incidental, while Section 334-8 includes the applicable construction requirements in asphalt payment. Adding another tack allowance to that reference can count the same work twice. For a private proposal, ask where tack is included, then identify base repairs, mobilization, traffic handling and markings. Put the lift thickness in writing; a conversion with the wrong thickness prices a different job.

Parking lot striping cost per linear foot

The six-inch white parking-space comparison yields a $1.32 per linear foot paint median and $2.88 thermoplastic median across FDOT’s available October 2026 market reports.

PorchRocket selected parking-space items deliberately. A highway stripe paid by gross mile would introduce another measurement question. The two chosen FDOT pay items are paid by linear foot and name parking spaces in their descriptions.

Marking specification Market reports with prices Market median Market middle half Statewide weighted average
Standard white paint, solid six-inch parking lines, 0710-11121 3 $1.32 per foot $1.15 to $2.66 $1.11 per foot
Standard white thermoplastic, solid six-inch parking lines, 0711-11121 5 $2.88 per foot $2.27 to $3.83 $2.95 per foot

Source for both rows: FDOT’s market and statewide reports, October 26, 2026 edition. The statewide averages weight quantities; the market medians give each available market report equal weight. Neither calculation assigns a price to every private parking stall.

For a measured 1,824 linear feet, the paint median produces 1,824 x $1.32 = $2,407.68. The thermoplastic median produces 1,824 x $2.88 = $5,253.12. Add mobilization separately, then price each symbol or other requested marking.

I would count the painted footage from the drawing or site measure, with line width written beside it. Put arrows and stop bars on their own takeoff. Record existing markings that need removal and distinguish a restripe from a new layout before comparing the material choices.

For accessibility-related quantities, the parking-lot statistics reference provides the separate requirements table. Keep that layout review beside the striping scope. A lineal-foot price alone does not determine the number or placement of accessible spaces.

Commercial landscaping cost per acre

The $38.67 FDOT market median and $45 Charlotte County bid median price mowing by acre-cycle; a commercial grounds contract needs its other services and frequencies priced separately.

The Charlotte County November 2025 tabulation shows mowing bids of $36, $45 and $55 per acre per cycle. It schedules seven mowing cycles and 12 litter-removal cycles. The same bidders quote litter removal separately at $10, $14.30 and $15 per acre-cycle.

The FDOT figures come from construction-contract mowing items. Section 107-3 of its FY 2026 to 2027 specifications measures the project acres for each accepted mowing cycle, which is why this analysis uses the label acre-cycle. Keep that construction scope separate from a full commercial grounds agreement.

That separation matters when an owner asks for an annual price. A per-acre mowing number does not specify the year’s visit count. It also does not assign a budget to planting beds or irrigation work. Ask for the service calendar before extending the unit price.

For an illustration, take a 6.4-acre property, assume 28 mowing visits annually and apply the $45 mowing-only reference. The math is 6.4 x $45 = $288 per visit, then $288 x 28 = $8,064 annually. The annual extension uses the property’s assumed service calendar, separate from Charlotte County’s seven-cycle schedule.

I would write a separate annual allowance for each requested service and mark the frequency beside it. Start with turf mowing and trimming. Price bed care and seasonal cleanup separately, then add irrigation checks. Record any requested treatments. Clarify who removes litter before mowing and what happens when a visit is deferred.

For territory planning, properties with lawns and planting beds are the starting accounts. Measure maintained acreage during the site review. A parcel boundary can include buildings, paving or land outside the maintenance scope, so ask the property manager to mark the service boundary on the plan.

Our commercial landscaping contracts guide covers the sales process. For a labor budget, use the separate trade wage reference and add the company’s equipment and travel costs. I would reject a route plan that leaves the crew driving past suitable neighboring properties between scheduled accounts.

Snow plowing cost per push

Three 2025 library proposals applicable at two inches of snow produce a $295 per push median, with a $280 to $585 interquartile range for that site.

The Bloomfield Township Public Library proposal analysis, in its February 18, 2025 packet, contains these plowing options:

Submitted base-depth price Snow depth covered by that band Treatment in PorchRocket’s calculation
$265 per push 1.5 to 3 inches Include for a two-inch comparison
$295 per push 1 to 2.9 inches Include for a two-inch comparison
$875 per push 1.5 to 3 inches Include for a two-inch comparison

Source for every row: the library’s 2025 proposal table. Seasonal fees and salting remain outside this calculation, as do the deeper-snow tiers. The three base prices share a two-inch comparison point even though their depth bands differ.

Dexter Township’s April 2025 packet, printed page 59, provides a different pair of references for winter 2025 to 2026: $175 per push at the township hall and $125 at the fire department, including shoveling sidewalks and stairs plus the accessible ramp, with salting separately priced. Keep those bundled scopes attached to the prices; they remain outside the library’s single-site comparison.

To see seasonal exposure, hold the library reference rate at $295 and assume 12, 18 or 26 pushes. The extensions are $3,540, $5,310 and $7,670. These are workload scenarios before salting; the counts are assumptions rather than a forecast for that property.

I would ask the buyer to approve the trigger and clearance window before pricing. Mark the snow-storage areas. Write the deeper-snow schedule beside the base rate and identify return visits. Sidewalk clearing needs an assigned scope, too. A fixed seasonal quote then needs an agreed workload basis and terms for work outside it.

Before applying a public snow price to a private lot, measure the plowing area and agree on the clearance deadline. Test that deadline against the route’s other stops. A nearby property can still require another truck if its buyer needs service at the same time as every existing account.

Water tower painting cost

Salina’s October 2025 painting line drew seven prices from $206,000 to $409,000, yielding a $226,080 median for that project’s stated scope.

The Sunset tower bid tabulation identifies project 25018 and separates Section 902 painting from Section 903 maintenance and safety modifications. PorchRocket includes the seven submitted painting prices and excludes the $320,000 engineer estimate.

Sorted submitted painting price Source and scope
$206,000 Salina, Section 902
$210,000 Salina, Section 902
$225,520 Salina, Section 902
$226,080 Salina, Section 902
$283,100 Salina, Section 902
$362,100 Salina, Section 902
$409,000 Salina, Section 902

The fourth sorted observation is the median. The quartiles interpolate between neighboring observations, giving $217,760 and $322,600. These calculations describe submitted painting prices, without assigning award status to a bid.

For a new estimate, I would request the surface areas and coating specification, then ask the bidder to identify preparation and containment requirements alongside the access plan. Keep structural repairs and safety modifications visible as separate work. The bid tab’s painting label alone does not establish an exterior-only price or a cost per gallon of tank capacity.

City and school buyers also let roofing and paving contracts. Bid Control by PorchRocket keeps bid papers with their addenda and adds past award amounts; Bid Team’s bid-writing service works the estimate and packet with you. You make the final call on your number, sign and send.

Fabric building re-cover cost

Calhoun’s 2025 catalog supports a site-specific re-cover quote, but it supplies no comparable published unit-price range for PorchRocket to summarize.

The manufacturer’s catalog explains that cover repair or replacement pricing depends on the existing cover system and may require photographs or a site visit. It distinguishes a one-piece bag cover from a keder panel system. That is enough to frame a quote request; it does not supply a dollar range.

I would start the request with existing cover details and the structure’s width and length. Add the profile. Identify end walls and openings, then list the tensioning hardware to replace. Ask who removes the old material and whether frame work is included. A quote should state what area its square-foot denominator measures if it uses one.

Avoid importing the cost of an entire new fabric building into a membrane-replacement line. A quote for a new structure can contain a different package of work. Keep re-cover observations in their own series until scope and measurement units match.

For companies building a fabric-structure territory, Asset Search can scope a custom search for visible structures and return reviewed site evidence. Bring that territory to a re-cover estimator for pricing. The cost table remains unfilled until a dated, comparable price can be attached to it.

How to build a local cost benchmark, step by step

An eight-step pricing process starts with a written scope, uses dated reference prices and replaces early allowances with measured quantities before a final proposal.

  1. Define the work you want. Write the accepted system, property type and minimum project size. A silicone-restoration campaign and a tear-off campaign need separate account rules, even when they cover the same streets.
  2. Choose the paid unit. Use roof square feet, paved square feet, asphalt tons, painted linear feet or acre-cycles as the specification requires. Keep the quantity beside the rate and label any conversion assumption.
  3. Pull the fitting properties in Ground Control. Select the territory, business type and building-size band, then roof material and age band or visible paved areas. Commercial records cost $10 to $20 per building, with the file delivered within 48 hours after payment.
  4. Collect dated local comparisons. Record the public buyer, report period and pay-item code, or keep the private proposal with its exclusions. Identify budgets and submitted prices separately from awards. The downloadable benchmark data gives you that worksheet structure.
  5. Measure the proposed scope. Confirm roof sections, asphalt boundaries or maintained acreage. Count the requested marking footage. Ask the property manager to confirm areas excluded from service and access restrictions affecting the work.
  6. Price the missing work explicitly. List repairs, preparation and mobilization where they apply. For recurring work, write the visit count and service trigger. Resolve allowances before comparing total proposals.
  7. Check the contribution after direct costs. Put crew time and equipment against the scoped revenue, including travel. Use the route-density calculator to test a service route, and keep fixed overhead outside the gross-profit calculation until it is allocated deliberately.
  8. Replace the reference with the result. Record your submitted amount and the reason for any scope change. When the job is performed, retain invoiced quantities and direct costs. Use those records for the next estimate with the same work definition.

I would keep a single benchmark sheet per service and territory. Put the source date beside every price so an estimator can refresh a line without rebuilding the whole file. When a record has an unresolved scope question, leave its rate outside the comparison until that question is answered.

Project size, gross margin and territory ROI

In this planning model, two 38,600-square-foot roof projects generate $270,200 in gross profit against a $10,000 list-and-sales budget, with all inputs stated below.

The campaign targets warehouses in a Fort Worth service area. Each acquired account is assigned one measured 38,600-square-foot replacement at the calculated $14 reference rate. Revenue is 38,600 x $14 = $540,400 per project. Set the direct-cost share at 75%, including installation labor and materials, equipment, disposal and job travel. Direct cost is $405,300, leaving $135,100 at a 25% gross margin before fixed overhead.

The acquisition budget combines 200 building records at the upper published base price of $20 each, for $4,000, with 100 sales and estimating hours at an all-in blended $60 per hour, for $6,000, bringing total spending to $10,000 before any optional contact-research add-ons. The hourly allowance includes outreach and travel as well as estimating.

The base funnel assigns 40 conversations, 10 held meetings, eight proposals and two signed projects to those 200 accounts. The signed-account rate is 2 / 200 = 1%. Job value supplies the scale of the return.

Campaign outcome Signed share of 200 buildings Roof revenue Project gross profit Acquisition cost per account ROI after $10,000 acquisition spend
Low: 1 signed account 0.5% $540,400 $135,100 $10,000 1,251%
Base: 2 signed accounts 1.0% $1,080,800 $270,200 $5,000 2,602%
High: 3 signed accounts 1.5% $1,621,200 $405,300 $3,333.33 3,953%

Source: PorchRocket’s stated planning inputs and the roof reference calculations. Every row keeps acquisition spending and project size fixed while changing the number of signed accounts.

Customer acquisition cost, or CAC, is acquisition spending divided by accounts won. Base CAC is $10,000 / 2 = $5,000. Lead-list ROI uses gross profit after acquisition spending, divided by acquisition spending: ($270,200 - $10,000) / $10,000 = 26.02, or 2,602%. The lead-list ROI calculator lets a sales manager replace the job and campaign inputs.

For the same 100 sales hours spent on an unfiltered territory, assign one signed project and no purchased list. Spending is $6,000, so CAC is $6,000. The targeted scenario spends $4,000 more on building selection, produces two projects with the same sales-hour budget and reduces CAC to $5,000. Both account counts are campaign assumptions, shown so the owner can decide what improvement would justify buying the list.

Recurring service adds another account-value layer. Assume each acquired account also signs a maintenance agreement at $3,700 annually, with a 50% gross margin and 85% annual retention after the first agreement year. Annual gross profit is $1,850. Sum $1,850 x 0.85 raised to each year from zero through nine, producing $9,905.22 in expected ten-year maintenance gross profit without discounting.

Add that amount to the single replacement’s $135,100 gross profit. Expected account value becomes $145,005.22 before fixed overhead and acquisition spending, or about 29 times the base $5,000 CAC. There is one replacement in that account model. The maintenance calculation does not assume another replacement during the period.

My decision rule is to choose the smallest building and scope that can pay for its sales effort while meeting the crew’s margin floor. Then work neighboring accounts with the same filters. If the project size or margin changes, update those inputs before ordering a larger territory.

Methodology

PorchRocket downloaded FDOT’s October 26, 2026 statewide and 14 market-area workbooks, then combined their selected pay items with separately identified manufacturer and public-project references.

The moving reports cover October 1, 2025 through September 30, 2026. The FDOT publication page explains that its unit prices use awarded contracts and weight prices by item quantity. PorchRocket retained the agency’s published two-decimal averages, rather than treating them as individual bid observations.

Analysis group Inclusion rule Calculation
FDOT asphalt Exact item 0334-1-13; 10 reports with a price Equal-weight median and quartiles of market-area averages
FDOT milling and mowing Exact items 0327-70-5 and 0107-2; 13 reports each Same market-report calculation; missing rows excluded
FDOT parking markings Exact parking-space items 0710-11121 and 0711-11121 Three paint and five thermoplastic market observations
Roof replacement One center from each of three linked references Manufacturer range midpoint; county amount / area; university budget midpoint / area
Silicone coating Two separately identified references Manufacturer midpoint and Bastrop package amount / area
Sealcoating One range per supplier Midpoints of the two published ranges, retaining the undated source label
Snow, mowing bid tab and tower painting Selected submitted prices within each named public project Separate project medians and quartiles; no pooled national average

Source files for the first three rows are FDOT’s raw reports. The other rows use the linked originals in their service sections. The research record retains each raw file and its input URL, alongside file hashes and the computation script. The script runs in Python isolated mode and produces the public CSV from those saved inputs.

Quartiles use linear interpolation. Sort the observations and locate percentile p at zero-based position (n - 1) x p, interpolating between adjacent values. Use p = 0.25 for the first quartile and p = 0.75 for the third. The median uses p = 0.5. Calculate with unrounded inputs and round only the displayed figures.

Two or three references do not establish a national installed-price distribution, and a quartile across agency averages describes those averages rather than the underlying bids. An undated supplier range remains undated, while figures from 2025 retain their source year throughout this November 2026 edition. Fabric re-cover pricing is left uncalculated because the reviewed source supplies no comparable unit-price series.

The CSV identifies each row’s pricing basis through its name and method field. Its columns are stat, value, unit, year, geography, source_name, source_url, method. Filter on the required service and pricing basis before reusing a row.

How to cite these statistics

A citation to PorchRocket should retain the source year and measurement unit, along with the observation count used to calculate each published median.

Suggested citation: PorchRocket, Commercial Roof Replacement Cost per Square Foot 2026: Exterior Benchmarks, 2026, https://porchrocket.com/commercial-exterior-cost-benchmarks.

Reuse these statistics with a link back to this page and preserve the observation type identified with each quoted statistic. Download the commercial exterior cost benchmark CSV for the calculations and source URLs. Cite the manufacturer’s outer range separately from PorchRocket’s derived midpoint statistics when both appear in your budget.

Building a priced territory with Ground Control

The fastest way to find commercial properties that fit your exterior crew’s job-size floor is Ground Control by PorchRocket. Choose the area and business type. Apply a building-size band and roof filters for material or age, or select visible paved parking areas, lawns or planting beds. Commercial records cost $10 to $20 per building and arrive within 48 hours after payment. Every record explains why it matched; report a wrong match within 30 days for a credit back. Owner information and decision-maker research are add-ons, and files arrive in CSV or Excel. Give your estimators buildings that fit the work, then start the owner conversation.

Questions people ask

Quick answers

What is commercial roof replacement cost per square foot in 2026?

The manufacturer reference used here publishes $8 to $20 per square foot for full tear-off and replacement. PorchRocket's comparison of three published source centers has a $14 median and a $12.67 to $16.56 interquartile range. Those inputs mix a manufacturer estimate, a county award and a university budget; specify the roof assembly before requesting local prices.

How much does commercial silicone roof coating cost per square foot?

The 2026 manufacturer guide used here lists $2.50 to $5.50 per square foot installed. A separate 2025 Bastrop project works out to $3.67 per square foot, including access ladders. These references require different scope checks, especially preparation, wet-area repairs, installed thickness and warranty requirements. A coating proposal starts with a roof assessment.

What is the sealcoating cost per square foot?

The two supplier references span $0.10 to $0.35 per square foot, with a $0.225 median of their midpoints. One source is dated February 2025 and the other is undated, both checked in November 2026. Price crack repair, patching and striping explicitly rather than assuming those items fit inside a sealer-only rate.

How much does a two-inch asphalt overlay cost per square yard?

The worked conversion produces $15.68 per square yard for the selected asphalt placement line, assuming a two-inch compacted lift and density of 145 pounds per cubic foot. Its input is the $144.15 median across 10 FDOT market-area averages. Milling, repairs, mobilization and markings need scope checks; avoid adding tack twice because FDOT treats that work as incidental.

What does parking lot striping cost per linear foot?

For six-inch white parking-space lines, PorchRocket's analysis of October 2026 FDOT reports finds a $1.32 median across three market-area paint averages and $2.88 across five thermoplastic averages. Those are specific public-work pay items. A private lot estimate must also price layout, surface preparation, symbols and mobilization.

How much does commercial landscaping cost per acre?

Mowing-only references here include a $38.67 median across 13 FDOT market-area averages and a $45 median across three bids on Charlotte County's 2025 contract. Both use an acre-cycle basis. Full commercial grounds care needs a separate service schedule covering visits, edging, beds, irrigation and other requested work.

What is a commercial snow plowing cost per push?

Three 2025 library proposals applicable at a two-inch snowfall list $265, $295 and $875 per push, giving a $295 median. These are offers for one site. Other township proposals price different properties at $125 or $175 per push. Lot area, sidewalks, depth tiers and separate salting terms control the comparison.

How much does water tower painting cost?

Salina's October 2025 painting line received seven submitted prices from $206,000 to $409,000, with a $226,080 median. That is one project's painting scope, excluding the engineer estimate and a separate maintenance and safety line. It does not establish an exterior-only price or a national rate per tower.

Can I use a new fabric building price to budget a re-cover?

No. The 2025 manufacturer catalog reviewed here calls for cover-system and site information before pricing repairs or replacement. A new structure price bundles different work. Request a re-cover quote that identifies fabric, end walls, tensioning hardware, removal and access costs; this analysis leaves the missing unit-price benchmark unfilled.

Research file

Sources used in this guide

Sources are linked at the claim they support and collected here for auditability. Vendor features and prices can change; verify them before purchasing.

  1. 2026 manufacturer roof replacement and coating rangesArmorThane: 2026 guide publishes full tear-off replacement at $8 to $20 per square foot and installed silicone at $2.50 to $5.50. Manufacturer estimates, not a transaction survey. Checked November 5, 2026.
  2. Agricultural Center roof replacement awardCumberland County: December 11, 2025 award of $142,712 for approximately 12,579 square feet of low-slope roof removal and replacement. Checked November 5, 2026.
  3. 300 Main Street roof replacement construction budgetUniversity of South Carolina: July 16, 2025 prequalification notice lists approximately 68,000 square feet and a $1.2 million to $1.4 million construction range. This is a budget, not an award. Checked November 5, 2026.
  4. Convention Center silicone coating resolutionCity of Bastrop: October 21, 2025 resolution approves $117,510 for approximately 32,000 square feet of silicone restoration, including fixed access ladders. Checked November 5, 2026.
  5. Published sealcoating cost rangeSealMaster: Undated manufacturer FAQ lists $0.10 to $0.30 per square foot and describes pricing factors. Retained as an undated reference, not labeled a 2026 price edition. Checked November 5, 2026.
  6. February 2025 sealcoating cost referenceAsphalt Kingdom: February 22, 2025 supplier publication lists sealcoating at $0.15 to $0.35 per square foot. Checked November 5, 2026.
  7. FDOT raw statewide and market-area cost reportsFlorida Department of Transportation: Downloaded all 14 market-area Excel reports, statewide moving averages and the 2025 annual workbook. Current moving editions ran October 26, 2026 and cover October 2025 through September 2026. Checked November 5, 2026.
  8. FDOT statewide 12-month published unit pricesFlorida Department of Transportation: October 26, 2026 PDF verifies the selected asphalt, milling, mowing and parking-marking pay items and statewide contract counts. Checked November 5, 2026.
  9. FY 2026 to 2027 construction measurement and payment specificationsFlorida Department of Transportation: Current construction specifications, Section 107-3, measure mowing by project acres for each accepted cycle; Section 334-8 defines asphalt payment, and Section 300-11 makes prime and tack coat work incidental. Checked November 5, 2026.
  10. South County mowing and litter bid tabulationCharlotte County: November 5, 2025 tabulation 20250728 separates per-acre mowing and litter prices, with seven mowing cycles and 12 litter cycles. Checked November 5, 2026.
  11. Library snow and grounds proposal analysisBloomfield Township Public Library: February 18, 2025 board packet includes three per-push plowing offers applicable to a two-inch snowfall, with salting and seasonal options separate. Checked November 5, 2026.
  12. Township 2025 to 2026 winter proposalsDexter Township: April 15, 2025 packet, printed page 59, contains a March 16 proposal for $175 per push at the township hall and $125 at the fire department. Checked November 5, 2026.
  13. Sunset water tower painting bid tabulationCity of Salina: October 9, 2025 project 25018, Section 902 painting line. Seven submitted prices; engineer estimate and separate maintenance/safety line excluded. Checked November 5, 2026.
  14. 2025 fabric structure catalog and re-cover guidanceCalhoun Super Structure: 2025 manufacturer catalog explains cover-system and site-review requirements for repair or replacement pricing; no comparable re-cover unit-price range published. Checked November 5, 2026.
Your next best move

Find buildings that clear your job-size floor.

Choose your territory, building types, roof criteria or visible paved areas. Ground Control sends matched buildings with the reason each one fits, so your team can start the conversation.

Price my territory