Privacy choices

Choose what we may use.

The site works without optional tracking. Your choice is saved on this device and can be changed here anytime.

Necessary

Runs the site, protects forms, and remembers this privacy choice.

Always on

Parking lot data

Parking Lot Statistics 2026: 25 Numbers With Sources

Get the source years behind national parking estimates, the accessible-parking table, and reproducible calculations for pavement area and mixed sealer.

The short answer

A peer-reviewed 2010 study estimated 105 million to 2 billion US parking spaces across five scenarios; that range is not a 2026 count. PorchRocket's 2026 layout analysis allocates 270 square feet per space to a double-loaded module using 9-by-18-foot stalls and a shared 24-foot aisle. At the cited manufacturer's application rate, 100 spaces require 660 to 780 gallons of mixed sealer for two coats before extra paved circulation. ADA requirements depend on each facility's space count.

Find parking lots

What matters most

  • Environmental Research Letters published the 105 million to 2 billion US parking-space range in 2010, so retain that date when citing it.
  • PorchRocket's 2026 calculations give 27,000 square feet for a 100-space parking module before end drives and entrances.
  • The general 2010 ADA scoping table requires 4 accessible spaces in a 100-space facility, including at least 1 van-accessible space.
  • PorchRocket's two-coat calculation uses 0.11 to 0.13 mixed gallons per square yard per coat from SealMaster's posted specification.
  • The downloadable CSV contains 119 source figures and calculated measures, with years, geography and methods.

A peer-reviewed US parking study produced a range of 105 million to 2 billion spaces in 2010. That is a wide starting point for a paving contractor trying to size a territory. The number also counts spaces, while an estimator needs paved square footage and a salesperson needs properties with someone responsible for the maintenance budget.

Updated November 2026. This reference separates published parking estimates from PorchRocket’s calculations of pavement quantities and accessible-space counts. The linked CSV carries the source year and method for each measure. Ground Control by PorchRocket handles the next question: which commercial properties in your territory have paved parking areas worth approaching.

Key statistics

These 25 parking lot statistics distinguish published research from PorchRocket’s 2026 calculations, with source years retained so each figure can travel with its attribution.

  • A 2010 study in Environmental Research Letters estimated 105 million to 2 billion US parking spaces across five inventory scenarios.
  • A 2019 paper in Cities estimated 12.2 million parking spaces in its metropolitan Phoenix study area for 2017.
  • PorchRocket’s analysis of the 2019 Cities paper’s rounded 2017 Phoenix totals calculates 4.27 parking spaces per registered personal vehicle.
  • PorchRocket’s analysis of North Little Rock’s posted 2025 dimensions gives 162 square feet for a 9-by-18-foot stall rectangle.
  • PorchRocket’s analysis of North Little Rock’s 2025 dimensions allocates 270 square feet per ordinary space to 9-by-18-foot stalls sharing a 24-foot aisle between two rows.
  • PorchRocket’s analysis of North Little Rock’s 2025 dimensions calculates 27,000 square feet for 100 ordinary spaces with a shared aisle, before extra paved circulation.
  • PorchRocket’s analysis of North Little Rock’s 2025 dimensions calculates 310.5 square feet per ordinary space after adding an assumed 15% paved-circulation allowance to a shared-aisle module.
  • PorchRocket’s analysis of North Little Rock’s 2025 dimensions calculates 351 square feet per ordinary space after adding an assumed 30% paved-circulation allowance to a shared-aisle module.
  • PorchRocket’s analysis of North Little Rock’s 2025 dimensions calculates 31,050 square feet for 100 ordinary spaces with a shared aisle and an assumed 15% extra paved circulation.
  • PorchRocket’s analysis of North Little Rock’s 2025 dimensions calculates 35,100 square feet for 100 ordinary spaces with a shared aisle and an assumed 30% extra paved circulation.
  • PorchRocket’s analysis of North Little Rock’s 2025 dimensions finds that 9-by-18-foot stall rectangles omit 40% of the area when two rows share a 24-foot aisle.
  • PorchRocket’s analysis of SealMaster’s MasterSeal Concentrate specification, revised in 2013, gives 660 mixed gallons for two coats over 27,000 square feet at 0.11 gallon per square yard per coat.
  • PorchRocket’s analysis of SealMaster’s 2013 MasterSeal Concentrate specification gives 780 mixed gallons for two coats over 27,000 square feet at 0.13 gallon per square yard per coat.
  • PorchRocket’s analysis of SealMaster’s 2013 MasterSeal Concentrate specification gives 759 to 897 mixed gallons for two coats over a 31,050-square-foot treatment area.
  • PorchRocket’s analysis of SealMaster’s 2013 MasterSeal Concentrate specification gives 858 to 1,014 mixed gallons for two coats over a 35,100-square-foot treatment area.
  • The 2010 ADA Standards, Table 208.2, require 1 accessible parking space in a general parking facility containing 1 to 25 spaces.
  • The 2010 ADA Standards, Table 208.2, require 4 accessible parking spaces in a general parking facility containing 76 to 100 spaces.
  • The 2010 ADA Standards, Table 208.2, require 9 accessible parking spaces in a general parking facility containing 401 to 500 spaces.
  • The 2010 ADA Standards, section 208.2.4, require at least 1 van-accessible space for every 6 required accessible spaces or fraction of 6.
  • PorchRocket’s analysis of the 2010 ADA Standards, Table 208.2 and section 208.2.4, calculates 11 accessible spaces, including at least 2 van spaces, for a general 501-space facility.
  • PorchRocket’s analysis of FHWA’s 2024 HM-12 workbook calculates a 69.9% paved share of road mileage covered by that table.
  • PorchRocket’s analysis of FHWA’s 2024 HM-12 workbook calculates a 58.9% paved share for covered rural road mileage.
  • PorchRocket’s analysis of FHWA’s 2024 HM-12 workbook calculates a 96.0% paved share for covered urban road mileage.
  • PorchRocket’s analysis of FHWA’s 2024 HM-12 workbook calculates a 94.7% paved share for covered urban local-road mileage.
  • ITE’s 2023 sixth-edition FAQ says its Parking Generation Manual update added study-site data across 63 land-use codes.

How many parking spaces are in the US?

The verified national research cited here spans 105 million to 2 billion spaces in a 2010 study, rather than establishing a single 2026 inventory.

The Environmental Research Letters study abstract on the researchers’ site describes alternative inventories developed to study parking infrastructure’s environmental effects. Its range represents five scenarios, so retain both endpoints and the study year in a citation.

That distinction matters when a number enters a sales presentation. A contractor’s addressable market excludes plenty of spaces within a national inventory. A private garage and an asphalt surface lot call for different work. Even a large surface lot might sit outside your hauling radius or belong to a buyer whose vendor process your office cannot support.

Use three separate nouns in a market worksheet:

Measure Question it answers What a contractor still needs
Parking spaces How much vehicle storage is represented? Layout and surface type
Parking facilities How many separate lots or garages exist? Service boundaries and access
Owner accounts How many buying relationships could you pursue? Authority, timing and vendor requirements

This table defines the units used in PorchRocket’s analysis. It does not supply a conversion between them. One property can have more than one facility, and one owner can control several properties.

I would put the national range in a research note and build the territory budget from named properties. Start with the buildings you can reach economically. Then determine which lots fit your equipment and which owners can authorize the work. The broader commercial building statistics reference provides a separate building-based view of the market.

Parking spaces per car depend on the study area

PorchRocket calculates 4.27 spaces per registered personal vehicle in the Phoenix study area for 2017, using rounded figures published in Cities in 2019.

The calculation is 12.2 million spaces divided by 2.86 million registered personal vehicles. Both inputs come from the same geography and year in the primary research manuscript: the urbanized area of Maricopa County in 2017. The paper defines cars as registered noncommercial passenger vehicles. Keep that study boundary and vehicle definition attached to the ratio.

Keep the denominator intact. “Per registered personal vehicle” carries more information than “per car.” If a second study uses households or a different vehicle category, its ratio answers a different question. The same problem appears when one parking estimate includes residential spaces and another addresses only nonresidential parking.

For a paving business, a space-to-vehicle ratio says little about next season’s workload. It cannot identify the lot that needs crack fill or the manager planning a restripe. Budget approval requires a conversation.

A territory worksheet should retain the study boundary and inventory date beside any regional estimate. Record the definition of a space too. Put your own target-property count in a separate column. That leaves the researcher free to discuss transportation supply while the sales manager tracks reachable buyers.

Do not multiply this Phoenix ratio by your county’s registered vehicles to claim a measured local inventory. If you use that calculation for an early planning scenario, label the assumption and replace it with a property inventory before allocating estimating time. I prefer the property inventory first when the decision is where to send a crew for a survey.

Square feet of paving per parking space

A double-loaded parking module allocates 270 square feet per ordinary space using 9-by-18-foot stalls and a shared 24-foot aisle, before additional circulation.

“Double-loaded” means parking rows on both sides of the same drive aisle. Each row receives half the aisle in the calculation. The City of North Little Rock’s posted 2025 ordinance, page 115, supplies this dimensional example: right-angle stalls 9 feet wide, 18 feet deep and served by a 24-foot parking aisle.

The arithmetic is short:

  • Stall rectangle: 9 × 18 = 162 square feet.
  • Stall plus allocated aisle: 9 × (18 + 24 ÷ 2) = 270 square feet.
  • Shared-aisle module for 100 spaces: 100 × 270 = 27,000 square feet.

Counting only painted rectangles leaves out 40% of that module’s paving: (270 − 162) ÷ 270 = 0.40. The aisle uses material too. Include it in the takeoff.

The calculation stops at a repeating module. An entrance throat or a paved turning area adds square footage. An island removes treatment area. Accessible stalls and their access aisles need their own geometry, and an irregular boundary can waste room without adding another parking space.

Use the 270-square-foot allocation to compare early scenarios. For a quote, draw the treatment boundary and measure it. Deduct excluded surfaces, then separate patching from sealcoat area so a repair quantity does not disappear inside the larger pavement total. The paving takeoff guide explains the handoff between an initial layout review and a measured scope.

Parking lot size by number of spaces

PorchRocket’s planning scenarios allocate 270, 310.5 or 351 square feet per space, depending on the assumed amount of paved circulation beyond the parking module.

The middle scenario adds 15% to the module. The expanded scenario adds 30%. Those percentages are author-selected allowances for extra paved entrances and circulation, rather than observed national averages or zoning requirements. Islands and unpaved areas are excluded from the assumed treatment area.

Ordinary-space planning count Module only, 270 sq ft/space With 15% extra paving, 310.5 sq ft/space With 30% extra paving, 351 sq ft/space
25 6,750 sq ft 7,762.5 sq ft 8,775 sq ft
50 13,500 sq ft 15,525 sq ft 17,550 sq ft
100 27,000 sq ft 31,050 sq ft 35,100 sq ft
200 54,000 sq ft 62,100 sq ft 70,200 sq ft
400 108,000 sq ft 124,200 sq ft 140,400 sq ft

Source: PorchRocket’s 2026 calculations using North Little Rock’s dimensional example and the stated circulation assumptions; every cell is reproduced in the CSV.

Treat a stall count as a screening input. A salesperson can use it to decide whether to request plans or schedule a walk. The estimator still needs the paved boundary and exclusions before committing to gallons, production hours or a unit price.

I would record the module estimate and measured quantity in separate fields. Over time, your own jobs will show how much extra circulation appears in the property types you serve. Keep shopping-center measurements apart from compact office lots. A blended average can hide the layout difference that drove the original estimating error.

Sealcoat material per 100 parking spaces

The 27,000-square-foot parking module requires 660 to 780 gallons of mixed sealer for two coats at the cited product’s published application rate.

The MasterSeal Concentrate specification calls for 0.11 to 0.13 gallon of properly mixed material per square yard per coat and recommends two coats. That is a product-specific rate. The currently posted sheet carries a September 2013 revision date.

First convert square feet to square yards by dividing by 9, the exact conversion in NIST’s area tables. Then multiply by the application rate and number of coats: 27,000 ÷ 9 × 0.11 × 2 = 660 mixed gallons.

100-space area scenario Treatment area Square yards Two coats at 0.11 gal/sq yd/coat Two coats at 0.13 gal/sq yd/coat
Module only 27,000 sq ft 3,000 660 mixed gal 780 mixed gal
15% extra paved circulation 31,050 sq ft 3,450 759 mixed gal 897 mixed gal
30% extra paved circulation 35,100 sq ft 3,900 858 mixed gal 1,014 mixed gal

Source: PorchRocket’s 2026 calculations from the linked manufacturer specification and the stated area scenarios. No waste allowance is included.

Keep mixed gallons separate from concentrate purchased. The same specification describes concentrate coverage separately. Label the tank quantity. Water and aggregate belong to the approved mix design; a tank’s finished mixture quantity is a different number from the concentrate on the supplier invoice.

Before ordering, attach the selected product sheet to the estimate and mark the treatment area by phase. Record any separately specified extra coat as its own quantity. This gives the foreman a material plan tied to the scope, with the excluded surfaces visible on the drawing.

Accessible parking requirements table

The general 2010 ADA table requires 1 accessible space for a facility with 1 to 25 spaces and 4 for one with 76 to 100 spaces.

Use Table 208.2 of the 2010 ADA Standards for the general scoping schedule below. Count each parking facility separately. The required accessible spaces are included within the facility’s total count.

Total spaces in one parking facility Minimum required accessible spaces
1 to 25 1
26 to 50 2
51 to 75 3
76 to 100 4
101 to 150 5
151 to 200 6
201 to 300 7
301 to 400 8
401 to 500 9
501 to 1,000 2% of total, rounded up
1,001 and over 20 plus 1 for each 100 spaces, or fraction of 100, above 1,000

Source: U.S. Access Board, 2010 ADA Standards, Table 208.2; checked November 2026.

Medical and residential provisions require a separate check. The Department of Justice’s parking guidance requires at least 10% of patient and visitor spaces serving hospital outpatient facilities to be accessible. The minimum is 20% for patient and visitor spaces serving outpatient physical therapy facilities or rehabilitation facilities specializing in conditions that affect mobility. Residential parking has separate provisions. An independent doctor’s office does not automatically fall into the hospital-outpatient category.

For striping work, ask for the facility’s approved layout before copying the old markings. The Department of Justice’s restriping brief explains that accessible parking must be provided as required by the 2010 Standards when a business or state or local government restripes parking facilities.

Keep the scoping calculation with the quote. List the facility count and the applicable category, then identify the drawing the crew will follow. A count without a layout leaves the foreman deciding where access aisles belong after the truck arrives.

Van-accessible parking counts and dimensions

At least 1 of every 6 required accessible spaces, or fraction of 6, must be van accessible under the 2010 ADA Standards.

Calculate the general accessible total first, then divide that required total by six and round up. Van spaces are part of the accessible total. The following examples apply sections 208.2 and 208.2.4 to separate general parking facilities.

Facility capacity Required accessible spaces Minimum van spaces within that total
100 4 1
400 8 2
501 11 2
1,000 20 4
1,001 21 4

Source: PorchRocket’s 2026 analysis of 2010 ADA Standards sections 208.2 and 208.2.4.

The Access Board’s technical guide describes two van-space arrangements: a space at least 132 inches wide beside an aisle at least 60 inches wide, or a space at least 96 inches wide beside an aisle at least 96 inches wide. Ordinary accessible car spaces are at least 96 inches wide with an aisle at least 60 inches wide.

The guide also specifies a maximum 1:48 slope for spaces and access aisles, and at least 98 inches of vertical clearance for van spaces, aisles and their vehicle route. Paint cannot fix a slope.

For a site survey, bring the proposed layout and record measurements at the intended accessible spaces. Check the route to the entrance before pricing a simple repaint. If the owner’s drawing leaves the aisle or route unresolved, resolve that with the project designer before assigning a striping quantity. The crew needs a dimensioned layout it can set out in the field.

ITE parking generation measures demand

ITE’s Parking Generation Manual, sixth edition from 2023, estimates demand by land use and setting rather than counting every existing parking space in a territory.

The public ITE resource summary distinguishes parking demand from trip generation. A parking-demand estimate addresses vehicles parked during a stated period; a supply inventory records spaces provided. Your maintenance takeoff addresses the surface within an agreed boundary.

The sixth-edition FAQ says the database contains observations collected from 1990 through 2023 and excludes sites surveyed during 2020 and 2021 from its plots and statistics. Its public explanation of mixed-use analysis considers the timing of each use’s demand instead of simply adding standalone peaks.

Those details matter when a buyer asks whether every existing stall must return after resurfacing. A service contractor can document the present markings and ask for the approved future plan. Deciding the required future supply needs the local requirements and a demand analysis suited to the property.

For territory planning, resist assigning the same spaces-per-building ratio to every retail or office address. Building use can screen properties for a call, but a demand ratio does not measure the asphalt you will coat. Save the inventory with the account. Attach demand studies and treatment takeoffs as separate records.

This reference uses ITE’s public methodological summaries. It does not reproduce licensed land-use rates or assign a national parking-demand average to individual properties.

FHWA pavement statistics cover roads

PorchRocket calculates that 69.9% of the road mileage covered by FHWA’s 2024 HM-12 table is paved, a road-length measure rather than parking-lot area.

The HM-12 publication, dated November 2025, reports road length by surface and system. We downloaded its raw Excel workbook and divided paved mileage by total mileage within each group.

HM-12 road group, 2024 Paved road miles Total covered road miles Paved share, PorchRocket calculation
All rural roads 1,664,528 2,825,017 58.9%
All urban roads 1,138,406 1,185,609 96.0%
Rural local roads 887,356 1,940,188 45.7%
Urban local roads 808,577 854,116 94.7%
All covered roads 2,802,934 4,010,626 69.9%

Source: PorchRocket’s analysis of the FHWA 2024 HM-12 workbook. Local-road rows are subsets. Do not add them to the all-road rows. Displayed miles are rounded; percentages use unrounded workbook values.

FHWA’s coverage footnote includes the 50 states, the District of Columbia and Puerto Rico, and identifies incomplete or missing data. These totals therefore retain the table’s reporting scope. They should not be substituted for totals from another highway table with different coverage.

Road miles cannot establish parking acres. A conversion would need widths and a definition of the included surfaces, and it would still describe roads. Nor does the paved total establish an asphalt-only share: FHWA distinguishes bituminous, concrete and composite pavement categories.

For a contractor, these figures provide pavement context. A parking-lot territory still needs a property inventory. Use commercial exterior cost benchmarks for separately sourced pricing context and building-system service-life references for the published life assumptions behind a maintenance forecast.

Six-year value of a parking-lot account

A four-lot owner account produces $27,955.20 of six-year job gross profit under the stated project-price and repeat-purchase assumptions, at a 28% job gross margin.

Say a three-truck sealcoating outfit in Columbus targets 80 buildings, each representing a separate owner account. Budget $20 per building for the list and 32 sales hours at a loaded $40 per hour, covering the campaign from research through quotes. List cost is $1,600; sales labor is $1,280; acquisition spend is $2,880. Assume the crew buys no owner or contact add-ons and incurs no other acquisition spending; include those costs when adapting the worksheet to your campaign.

Assume a signed owner brings four qualifying lots, each buying a separately approved $12,480 project twice across six years. Hold project prices and the 28% job gross margin constant across both purchases. Account revenue is 4 × $12,480 × 2 = $99,840 and gross profit after direct service costs is $99,840 × 0.28 = $27,955.20, undiscounted.

Customer lifetime value, or LTV, measures that gross profit over the relationship. Customer acquisition cost, or CAC, divides the campaign’s spending by accounts signed. Lead-list ROI subtracts acquisition spending from account gross profit and divides the remainder by that spending.

Six-year acquisition scenario Owner accounts signed CAC Modeled job gross profit Net lead-list ROI
Low 1 $2,880 $27,955.20 8.71 times acquisition spend
Base 2 $1,440 $55,910.40 18.41 times acquisition spend
High 3 $960 $83,865.60 28.12 times acquisition spend

Source: PorchRocket’s stated 2026 model in the calculation CSV. ROI measures job gross profit after acquisition spending, before corporate overhead, and is rounded to two decimals. For the base case, ($55,910.40 − $2,880) ÷ $2,880 = 18.413333…, displayed as 18.41 times acquisition spend.

The base result uses two owner accounts from 80 building targets. Avoid counting the same owner twice when several listed buildings belong to one portfolio. The lead-list ROI calculator lets you replace account value and spending with your own assumptions.

Fit changes the output of the same sales hours. Hold 80 reviewed buildings and 32 sales hours constant. At an assumed 25% confirmed service fit and 20% qualified-visit conversion, a broad list produces four visits. At 50% confirmed fit and the same visit conversion, a targeted list produces eight. That doubles qualified visits within the same labor budget.

My decision rule is to buy the next territory slice when confirmed fit improves and the first slice produces surveys your crew can price profitably. Use the parking-lot sealcoating prospecting guide to shape that first offer and the commercial paving contract guide to qualify the buying account.

How to build a parking-lot territory, step by step

An eight-step territory plan starts with the work your crew can perform and finishes with measured scopes, owner-level accounts and a scheduled follow-up.

  1. Choose the first service. Pick crack fill and sealcoat, restriping or a larger paving scope. Write the job characteristics your equipment can handle before collecting addresses.
  2. Draw the service territory. Use travel time and mobilization cost to set the boundary. Keep a distant cluster separate so it can earn its own crew day.
  3. Pull the paved properties. Order buildings with paved parking areas through Ground Control’s parking-lot list, selecting business types and territory at $10 to $20 per building, with the file delivered within 48 hours after payment.
  4. Join buildings to owners. Add owner research where needed and group properties under the same buying account. Ask who handles maintenance and who approves a larger project.
  5. Record the starting quantity. Use plans or an initial layout review to decide whether a survey is worthwhile. Keep the planning area separate from the eventual measured takeoff.
  6. Survey the treatment boundary. Measure paved surfaces and exclusions, then document repairs separately. Check the accessible-space layout with the owner’s approved plan before pricing markings.
  7. Build the material worksheet. Select the product and application rate, convert the measured area to square yards, and calculate each coat. Put mixed gallons and concentrate requirements in separate fields.
  8. Review the first campaign. Record confirmed fit and qualified surveys by property type. Track proposals and signed owner accounts separately, then order the next slice around the property types that produced work you want.

For properties where the paved work extends into service yards, industrial-yard property lists can support a different campaign. Give that scope its own qualification questions instead of treating every paved surface as passenger parking.

Public lots belong in a separate buying workflow. Bid Control by PorchRocket for paving finds city, county and school opportunities with bid papers, addenda and past award information. Read the agency’s scope and submission requirements before committing estimating time to that work.

Methodology

PorchRocket’s November 5, 2026 analysis combines downloaded primary-source files with explicit dimensional scenarios; the 119-row CSV separates source years from calculation dates.

The national range is taken from the 2010 Environmental Research Letters study. Phoenix supply and vehicle totals are the rounded 2017 figures in the 2019 Cities paper; dividing them produces 4.27 spaces per registered personal vehicle. That ratio inherits the rounding of its inputs.

The FHWA input is the 2024 HM-12 Excel workbook, dated November 2025. We select the all-rural, all-urban and combined rows, plus the rural and urban local-road rows. Paved share equals column F divided by column G, multiplied by 100. Road miles are rounded for display and shares to one decimal place; no states are ranked from this national-summary table.

The area model uses the posted 2025 North Little Rock dimensional example, adding assumed paved-circulation allowances of 0%, 15% and 30%. Each area is divided by nine and multiplied by the cited mixed-sealer rate and two coats. General ADA examples apply Table 208.2, rounding fractions up, then calculate van spaces as the required accessible total divided by six, rounded up.

The reproducibility package retains the downloaded inputs beside the computation script. A manifest records source URLs and file hashes. Running the script regenerates the CSV and a calculation summary. The CSV’s columns are stat, value, unit, year, geography, source_name, source_url and method.

These calculations do not measure a national parking inventory or diagnose pavement condition. Layout allowances and sales economics are stated scenarios, while actual treatment quantities require a measured boundary. Medical and residential ADA provisions fall outside the general-facility examples.

How to cite these statistics

Cite PorchRocket for the original calculations and retain the underlying source year and geography whenever reusing a parking inventory or an accessible-space requirement.

Suggested citation: PorchRocket, “Parking Lot Statistics 2026: 25 Numbers With Sources,” 2026, https://porchrocket.com/parking-lot-statistics.

You may reuse the figures with a link back to this page. The parking lot statistics CSV contains the source URL and method beside each value, including the planning scenarios and the account-value model.

For the area calculation, a self-contained citation is: “PorchRocket’s 2026 analysis allocates 270 square feet per ordinary parking space to a double-loaded module using 9-by-18-foot stalls and a shared 24-foot aisle, before extra paved circulation.”

For a national estimate, name Environmental Research Letters and 2010. For Phoenix, retain the study area and 2017 inventory year alongside the paper’s 2019 publication date. Keep “mixed gallons” attached to sealcoat quantities. Those words prevent a calculated application quantity from being mistaken for a concentrate order.

Building your parking-lot list with Ground Control

The fastest way to find commercial paving prospects is Ground Control by PorchRocket: select your territory, business types and paved parking areas, then receive a CSV or Excel list within 48 hours after payment, often sooner. Commercial buildings cost $10 to $20 each, with orders starting at 10 buildings; every property includes why it matched. Owner information and decision-maker contact research are available as add-ons. Wrong matches receive a credit within 30 days. These are target properties for your team to approach. Start with the territory your trucks can serve profitably, then survey the matched properties and price their measured work.

Questions people ask

Quick answers

How many parking spaces are in the United States in 2026?

The national study cited here does not establish a 2026 total. Environmental Research Letters published a five-scenario estimate ranging from 105 million to 2 billion US spaces in 2010. Retain the publication year and describe the figures as scenario estimates. A count of parking spaces also differs from a count of parking lots or commercial properties.

How many parking spaces are there per car?

About 4.27 spaces per registered personal vehicle in the metropolitan Phoenix study area for 2017, calculated by PorchRocket from the paper's rounded inputs of 12.2 million spaces and 2.86 million vehicles. The research appeared in Cities in 2019. That regional ratio should retain its geography and vehicle definition when quoted.

How many square feet should I allow per parking space?

The double-loaded example here allocates 270 square feet per ordinary space: 9 feet of width multiplied by 18 feet of depth plus half a shared 24-foot aisle. Adding assumed paved-circulation allowances of 15% or 30% raises the figures to 310.5 or 351 square feet. Measure the property's treatment area before ordering material.

How large is a 100-space parking lot?

The article's area scenarios give 27,000 to 35,100 square feet of paving for 100 spaces, depending on the allowance for paved circulation beyond the repeated parking module. The middle scenario is 31,050 square feet. These are layout calculations; accessible-space geometry, entrances and irregular boundaries require a site-specific takeoff.

How many gallons of sealcoat cover 100 parking spaces?

For the 27,000-square-foot module, two coats require 660 to 780 gallons of mixed sealer using the cited product's 0.11 to 0.13 gallon-per-square-yard rate per coat. At 31,050 square feet, the quantity becomes 759 to 897 gallons. Those quantities describe mixed material, not gallons of concentrate purchased.

How many accessible spaces does a 100-space lot need?

Four accessible spaces, including at least one van-accessible space, under the general 2010 ADA Standards table and van-space rule. Calculate each parking facility separately. Hospital outpatient parking, rehabilitation facilities specializing in mobility-related conditions, outpatient physical therapy parking and residential parking follow separate provisions that can change the required count.

Does ITE parking generation count all the parking spaces in a city?

No. ITE's Parking Generation Manual estimates parking demand by land use and setting from study observations. A supply inventory counts the spaces provided. For a property decision, compare the physical inventory, observed occupancy and applicable local requirements rather than treating a demand estimate as proof of the number of existing spaces.

What is the fastest way to find commercial parking-lot prospects?

Ground Control finds commercial buildings with paved parking areas in your selected territory and business types for $10 to $20 per building. Files arrive within 48 hours after payment, often sooner, and wrong matches receive a credit within 30 days. Add owner or decision-maker research when needed, then confirm site quantities during the survey.

Research file

Sources used in this guide

Sources are linked at the claim they support and collected here for auditability. Vendor features and prices can change; verify them before purchasing.

  1. Parking infrastructure: energy, emissions, and automobile life-cycle environmental accountingEnvironmental Research Letters: Researcher-hosted abstract of the peer-reviewed 2010 study, including its five-scenario US parking-space range; checked November 2026.
  2. Metropolitan Phoenix parking inventory, published in Cities in 2019National Science Foundation Public Access Repository: Primary research manuscript reporting 12.2 million parking spaces and 2.86 million registered personal vehicles for 2017; checked November 2026.
  3. 2010 ADA Standards, sections 208 and 502U.S. Access Board: General accessible-space scoping table, separate-facility calculation and van-space ratio; checked November 2026.
  4. Guide to the ADA Standards: Parking SpacesU.S. Access Board: Technical dimensions, slope, clearance and the relationship between van spaces and access aisles; checked November 2026.
  5. Accessible Parking SpacesU.S. Department of Justice: General parking requirements and medical-facility exceptions; checked November 2026.
  6. ADA Compliance Brief: Restriping Parking SpacesU.S. Department of Justice: Posted February 2020 guidance on accessible parking when restriping; checked November 2026.
  7. Trip and Parking Generation resourcesInstitute of Transportation Engineers: Public summary identifies Parking Generation Manual sixth edition, 2023, and distinguishes parking demand from trip generation; checked November 2026.
  8. Parking Generation Manual sixth-edition FAQInstitute of Transportation Engineers: Public documentation of data years, pandemic-year exclusions, land-use updates and mixed-use methods; checked November 2026.
  9. Highway Statistics 2024, HM-12Federal Highway Administration: November 2025 table of public-road length by surface, with incomplete-coverage footnote; checked November 2026.
  10. HM-12 raw Excel workbookFederal Highway Administration: Downloaded raw workbook used to compute paved shares from unrounded mileage values; checked November 2026.
  11. North Little Rock posted 2025 zoning ordinance, page 115City of North Little Rock: Published dimensional example: right-angle stalls 9 feet wide and 18 feet deep with a 24-foot parking aisle; checked November 2026.
  12. MasterSeal Concentrate specification SMT-110SealMaster: Currently posted specification, revision September 2013; two coats and 0.11 to 0.13 mixed gallons per square yard per coat; checked November 2026.
  13. NIST Handbook 44, 2026, Appendix CNational Institute of Standards and Technology: Exact area conversions: 9 square feet per square yard and 43,560 square feet per acre; checked November 2026.
Your next best move

Find the paved properties your crew can serve.

Choose your territory and commercial property types. Ground Control returns buildings with paved parking areas and the reason each one matched, with owner and decision-maker research available as add-ons.

Find parking lots