Privacy choices

Choose what we may use.

The site works without optional tracking. Your choice is saved on this device and can be changed here anytime.

Necessary

Runs the site, protects forms, and remembers this privacy choice.

Always on

Stormwater statistics

Stormwater Utility Statistics 2026: 26 Numbers With Sources

State counts, residential fee distributions and MS4 program figures, with the denominators kept visible. Use the tables to compare territories and build a basin inventory.

The short answer

Western Kentucky University's 2026 survey lists 2,202 U.S. stormwater utility records and reports a $6.33 average monthly residential fee. PorchRocket's analysis excludes 13 records marked repealed, leaving 2,189 records and 1,977 reported fees; their median is $5 and their mean is $6.34. The state table combines those records with Census population estimates. Utility counts, MS4 systems and detention ponds measure different markets.

Inventory my basins

What matters most

  • PorchRocket's analysis of WKU's 2026 appendix identifies 13 repeal flags and retains 2,189 utility records for comparison.
  • Minnesota has 39.3 listed utility records per million residents, using the 2026 appendix and July 2025 Census population estimates.
  • The $5 median monthly residential fee describes 1,977 reported fees, with each utility weighted equally.
  • EPA's MS4 system counts cannot be used as a count of individual permits or detention ponds.
  • Asset Search builds local inventories with parcel information, dated evidence and reviewed dispositions for every candidate.

The 2026 Western Kentucky University stormwater utility survey lists 2,202 U.S. utility records. Its $6.33 mean monthly residential fee is a financing benchmark. A contractor pricing a basin cleanout needs a different set of numbers: which facilities exist, who maintains them and what work the owner buys. WKU’s 2026 report supplies the starting records.

Updated November 2026. PorchRocket recounted the survey appendix, separated repeal flags and joined the remaining records to Census state populations. The tables below preserve those filters and the fee sample sizes. Asset Search by PorchRocket builds the local basin inventory behind a territory decision, with reviewed locations and dated evidence.

Key statistics

The 2026 WKU appendix and PorchRocket’s calculations show a concentrated utility market, a $5 median residential fee and substantial differences between state counts.

  • The 2026 WKU stormwater utility survey lists 2,202 numbered U.S. utility records in Appendix A.
  • PorchRocket’s analysis of WKU’s 2026 appendix identifies 13 records explicitly marked repealed.
  • PorchRocket’s analysis of WKU’s 2026 appendix retains 2,189 U.S. records after excluding those repeal flags.
  • PorchRocket’s analysis of WKU’s 2026 appendix finds 1,977 numeric monthly residential fees among the retained records.
  • PorchRocket’s analysis of WKU’s 2026 appendix leaves 212 retained records without a reported numeric fee.
  • PorchRocket’s analysis of WKU’s 2026 appendix calculates a $6.34 unweighted mean monthly residential fee across 1,977 reported fees.
  • PorchRocket’s analysis of WKU’s 2026 appendix calculates a $5.00 median monthly residential fee across 1,977 reported fees.
  • PorchRocket’s analysis of WKU’s 2026 appendix places the 25th percentile monthly residential fee at $3.25.
  • PorchRocket’s analysis of WKU’s 2026 appendix places the 75th percentile monthly residential fee at $7.70.
  • PorchRocket’s analysis of WKU’s 2026 appendix places the 90th percentile monthly residential fee at $12.04.
  • PorchRocket’s analysis of WKU’s 2026 appendix retains two explicitly reported $0 monthly residential fees rather than treating missing fees as zero.
  • PorchRocket’s analysis of WKU’s 2026 appendix finds a maximum reported monthly residential fee of $47.72.
  • PorchRocket’s analysis of WKU’s 2026 appendix finds 340 reported monthly residential fees below $3, representing 17.2% of the retained fee sample.
  • PorchRocket’s analysis of WKU’s 2026 appendix finds 49 reported monthly residential fees of at least $20, representing 2.5% of the retained fee sample.
  • PorchRocket’s analysis of WKU’s 2026 appendix counts 229 Minnesota utility records without repeal flags, the largest state total.
  • PorchRocket’s analysis of WKU’s 2026 appendix counts 213 Florida utility records without repeal flags.
  • PorchRocket’s analysis of WKU’s 2026 appendix counts 150 Texas utility records without repeal flags.
  • PorchRocket’s analysis of WKU’s 2026 appendix and Census July 2025 populations calculates 39.3 listed utility records per million Minnesota residents.
  • PorchRocket’s analysis of WKU’s 2026 appendix and Census July 2025 populations calculates 35.2 listed utility records per million Iowa residents.
  • PorchRocket’s analysis of WKU’s 2026 appendix finds that the nine states with more than 100 retained records hold 63.0% of all 2,189 records without repeal flags.
  • EPA’s municipal stormwater overview, available in November 2026, reports approximately 855 Phase I MS4 systems.
  • EPA’s municipal stormwater overview, available in November 2026, reports 6,695 Phase II MS4 systems.
  • EPA’s municipal stormwater overview, available in November 2026, associates approximately 250 individual permits with its Phase I MS4 count.
  • Pennsylvania DEP’s municipal stormwater page, checked in November 2026, lists 1,059 small MS4s statewide.
  • EPA’s 2022 Clean Watersheds Needs Survey reports $115.3 billion in stormwater capital needs over the subsequent 20 years, measured in January 2022 dollars.
  • Raleigh’s July 2026 schedule charges commercial properties $8.47 monthly per 2,260-square-foot single-family equivalent unit before applicable adjustments.

The calculations behind these bullets appear in the downloadable stormwater statistics CSV. Its method column identifies the filter, denominator or arithmetic behind each result.

How many stormwater utilities are in the U.S.?

WKU’s June 2026 report lists 2,202 U.S. records, while PorchRocket’s count excluding the appendix’s 13 repeal flags is 2,189.

Use 2,202 when citing WKU’s published list and 2,189 when citing PorchRocket’s filtered analysis. The appendix labels a hyphen in its fee-type column as “Repealed.” Removing those rows lets a researcher reproduce the comparison without making a separate judgment about each community’s current status.

The WKU survey compiles information found through public websites and municipal codes. Its appendix includes historical entries. A record without a repeal flag can still need a current ordinance or billing-page check before it becomes a sales target.

For this analysis, a stormwater utility record represents a listed local financing arrangement. The buying account may sit elsewhere: a public works department can procure maintenance, while a private property owner may be responsible for a particular basin. Record the department or owner beside each facility before assigning it to a salesperson.

I would use the national count to explain the scale of dedicated stormwater financing. I would use a city’s current facility inventory and purchasing records to decide whether a particular maintenance territory deserves another truck.

A city entry and a county entry can occupy overlapping territory. We count them separately because the appendix lists them separately. When building a local territory, retain both financing records and join them to the service boundaries. That preserves the distinction between the entities collecting fees and the facilities your crew can reach.

Stormwater utilities by state and per million residents

Minnesota leads with 229 retained records and 39.3 records per million residents; Iowa follows at 35.2 records per million.

The table counts WKU 2026 appendix records without repeal flags and divides each state’s total by its July 1, 2025 population from the Census Vintage 2025 raw state file, preserving the two reference years in the CSV. Each fee median uses only that state’s reported numeric fees after the same repeal filter.

State Records Per million residents Fees (n) Median monthly fee
Alabama 6 1.2 5 $0.83
Alaska 0 0.0 0 Unavailable
Arizona 7 0.9 7 $3.10
Arkansas 3 1.0 3 $4.25
California 64 1.6 52 $3.79
Colorado 51 8.5 49 $6.62
Connecticut 2 0.5 2 $6.85
Delaware 4 3.8 4 $5.50
District of Columbia 1 1.4 1 $2.67
Florida 213 9.1 207 $6.00
Georgia 81 7.2 76 $4.00
Hawaii 0 0.0 0 Unavailable
Idaho 2 1.0 1 $4.00
Illinois 34 2.7 34 $5.98
Indiana 129 18.5 122 $5.00
Iowa 114 35.2 101 $3.00
Kansas 40 13.4 39 $4.00
Kentucky 17 3.7 17 $4.00
Louisiana 1 0.2 1 $8.16
Maine 8 5.7 5 $6.75
Maryland 20 3.2 19 $5.08
Massachusetts 31 4.3 30 $7.00
Michigan 10 1.0 7 $16.75
Minnesota 229 39.3 141 $5.39
Mississippi 0 0.0 0 Unavailable
Missouri 5 0.8 4 $2.38
Montana 7 6.1 7 $4.88
Nebraska 3 1.5 3 $1.00
Nevada 3 0.9 3 $9.31
New Hampshire 0 0.0 0 Unavailable
New Jersey 5 0.5 3 $6.42
New Mexico 1 0.5 1 $5.50
New York 1 0.0 1 $4.75
North Carolina 108 9.6 104 $4.47
North Dakota 5 6.3 4 $2.94
Ohio 142 11.9 137 $3.50
Oklahoma 22 5.3 22 $3.00
Oregon 69 16.1 63 $6.40
Pennsylvania 90 6.9 90 $8.00
Rhode Island 0 0.0 0 Unavailable
South Carolina 44 7.9 43 $5.25
South Dakota 4 4.3 2 $1.68
Tennessee 38 5.2 35 $3.50
Texas 150 4.7 140 $4.61
Utah 76 21.5 68 $6.00
Vermont 9 14.0 7 $4.53
Virginia 32 3.6 32 $5.15
Washington 156 19.5 140 $11.95
West Virginia 13 7.4 13 $5.00
Wisconsin 139 23.3 132 $5.00
Wyoming 0 0.0 0 Unavailable

Source for every row: PorchRocket’s analysis of WKU Appendix A and Census Vintage 2025. Fees are survey observations, not a replacement for current local schedules. A zero means no record under this filter; New York’s positive count rounds to 0.0 per million at one decimal place.

The formula is records divided by population, multiplied by one million. For Minnesota, that is 229 / 5,830,405 x 1,000,000 = 39.3, rounded to one decimal. This measures the number of listed financing arrangements relative to residents. Measuring residents served would require each utility’s service boundary and population instead.

Use the fee sample column before comparing state medians. Minnesota’s median uses 141 fees even though its record count is 229. A state with one reported fee has a one-observation result, not a statewide price survey. I would not rank prospective markets by those thin fee medians.

The nine states with more than 100 retained records contain 1,380 records, or 63.0% of the filtered national total. That concentration can guide a first review of state coverage. A local service company still needs a narrower count of facilities within its drive radius. The same distinction applies to commercial building statistics: a statewide denominator helps explain scale, while the territory decision depends on buildings and sites the crew can serve.

Average stormwater fee and fee distribution

Among 1,977 retained reported fees, PorchRocket calculates a $6.34 monthly mean, a $5 median and a middle-half range of $3.25 to $7.70.

These are single-family residential benchmarks in the survey. Each listed fee gets equal weight. A utility serving a small community contributes one observation, just as a large utility does. No customer-account weighting is applied.

Measure Monthly residential fee Interpretation
Minimum $0.00 Two explicitly reported zeros remain in the sample
10th percentile $2.00 Lower-tenth boundary, using interpolation
25th percentile $3.25 Lower boundary of the middle half
Median $5.00 Middle reported fee
Arithmetic mean $6.34 Sum of retained fees divided by 1,977
75th percentile $7.70 Upper boundary of the middle half
90th percentile $12.04 Upper-tenth boundary, using interpolation
Maximum $47.72 Highest retained reported fee

Source: PorchRocket’s analysis of WKU’s 2026 appendix, excluding repeal flags and missing fees, retaining reported zeros.

Why does the survey itself say $6.33? Including every reported fee in the appendix produces 1,979 observations and a $6.33 rounded mean. Removing the two numeric fees attached to repeal-flagged rows produces the $6.34 result. The filter changes; the observations have not been adjusted for inflation.

The fee bands show how many observations sit behind the percentiles:

Monthly fee band Reported fees Share of 1,977
Under $3 340 17.2%
$3 to under $5 599 30.3%
$5 to under $10 730 36.9%
$10 to under $20 259 13.1%
$20 and above 49 2.5%

Source: PorchRocket’s analysis of WKU Appendix A, with lower band boundaries included and upper boundaries excluded.

A budget writer can use the median as an orientation point. A billing manager should use the local adopted rate. Multiplying the $5 median by 12 gives a $60 annual equivalent, but multiplying it by all parcels in a city would ignore commercial billing units and residential tiers.

The distribution also answers a common comparison problem. A fee above the median does not, by itself, identify an overpriced program. Before using the national median to challenge a local rate, ask for the adopted service plan and the projects that rate must fund, because the survey’s fee comparison does not adjust for differences in service.

What does an equivalent residential unit measure?

An equivalent residential unit, or ERU, is a locally defined impervious-area benchmark used to translate a property’s runoff-related footprint into billing units.

The WKU report describes several fee structures. PorchRocket counts 1,120 ERU-coded records after including the appendix’s single literal “ERU” code with its “E” records. That is 51.2% of the 2,189 retained entries.

Fee approach in the appendix Retained records What to check in the local schedule
ERU, including literal ERU code 1,120 Unit area, rate and rounding
Fixed rate 253 Which property classes pay that rate
Tier system 247 Area thresholds and class definitions
Residential equivalence factor or similar 149 The factor assigned to the property
Two-level residential/commercial system 124 Classification and applicable charge
Other or unspecified codes 296 The ordinance and current billing method

Source: PorchRocket’s code counts from WKU Appendix A. The last row groups the remaining codes, including missing information.

Start a commercial fee check with measured impervious area. Divide that area by the utility’s unit area, then apply its approved rate and local adjustments. Roof footprint alone can leave out a paved yard or parking area included in the bill.

A mapped surface and a billed account also need a documented relationship. Put the parcel identifier next to the account identifier. Where a site spans several parcels, establish how the utility allocates those parcels before calculating a proposed correction. A different parcel allocation can change the account calculation even when the measured site area stays the same.

Our impervious-surface billing guide explains that reconciliation in more detail. For writers comparing terminology across datasets, the asset search glossary covers the difference between an asset, a parcel and a billing unit.

Current stormwater fee examples from July 2026 schedules

Raleigh charges $8.47 monthly per 2,260-square-foot unit, while Durham charges nonresidential parcels $11.80 monthly per 2,400-square-foot unit under their July 2026 schedules.

Those two unit prices should be compared on equal area. PorchRocket divides each rate by its unit area and multiplies by 1,000:

City schedule Billing unit area Commercial monthly rate per unit Calculated rate per 1,000 impervious square feet
Raleigh, July 2026 2,260 sq. ft. $8.47 $3.75
Durham, July 2026 2,400 sq. ft. $11.80 $4.92

For an illustrative 27,120-square-foot impervious area, Raleigh’s formula produces 27,120 / 2,260 x $8.47 = $101.64 monthly. Durham’s calculation with fractional units produces 27,120 / 2,400 x $11.80 = $133.34 monthly after cent rounding. These calculations exclude credits and any separate local billing adjustments.

The point is the unit conversion. A residential median of $5 cannot price a commercial property’s fee, and a commercial unit rate cannot be compared without its square-foot denominator.

Raleigh calls its unit a single-family equivalent unit, or SFEU. Its page also publishes residential tiers. Durham uses ERU and publishes its own residential tiers. Retain the local label when copying a rate into an account review so the reviewer can trace the formula to the correct schedule.

For a maintenance contractor, a fee credit is a separate question from a service quote. Raleigh describes credits for qualifying detention beyond the required amount. A visible basin does not establish that the property has an approved credit. Ask the owner for the account determination before putting a savings figure in an offer.

How many MS4 systems and permits are there?

EPA’s published overview reports approximately 855 Phase I MS4 systems and 6,695 Phase II systems, with about 250 individual permits associated with Phase I.

An MS4 is a municipal separate storm sewer system. EPA’s overview distinguishes the systems from the permits covering them. Most Phase II systems have general-permit coverage.

Published program measure Figure Counting unit
Phase I national overview Approximately 855 MS4 systems
Phase I individual coverage Approximately 250 Individual permits
Phase II national overview 6,695 MS4 systems
Sum of published phase counts Approximately 7,550 Systems, not distinct permit documents
Pennsylvania large MS4s 1 State-listed system
Pennsylvania medium MS4s 1 State-listed system
Pennsylvania small MS4s 1,059 State-listed systems

Sources: EPA national program overview and Pennsylvania DEP, available November 2026. The national sum is PorchRocket’s addition of the two published phase counts, not a fresh permit-registry census.

Do not add the Pennsylvania rows to the national rows. They describe a state within that national program. Similarly, a permit covering several participating systems can produce several system records without producing several permit documents.

The designation language also matters in a current reference. Effective July 12, 2023, EPA’s clarification replaced “urbanized area” with urban areas having a population of at least 50,000, so the population threshold refers to the urban area rather than requiring every municipality inside it to individually have 50,000 residents.

For a sales territory, start with the state permitting authority’s current operator list, then identify the department buying the scope you perform. A university or transportation operator can belong in an MS4 program without belonging in a list of city stormwater utilities. The utility table and the permit table should remain separate tabs in the territory workbook.

Do MS4 counts tell you how many detention ponds exist?

A national detention-pond total cannot be calculated from WKU utility records or EPA’s program-level MS4 figures because neither dataset inventories individual basins.

The records answer different questions. A utility record concerns financing. An MS4 record concerns a regulated system. A basin inventory concerns physical facilities. Assigning an assumed number of ponds to every utility would introduce a multiplier neither source provides.

For a local inventory, start by agreeing on the asset definition. Decide whether a connected pair of cells is one maintenance site or two assets. Keep a site identifier that groups several asset identifiers, allowing an estimator to count the locations requiring separate mobilization while an inspector counts the individual features to review within each of those locations.

EPA’s stormwater maintenance guidance identifies responsible parties and maintenance schedules among the elements of an operations plan. Use those fields in the inventory from the start. A coordinate without maintenance responsibility still leaves the sales team searching for the buyer.

Fairfax County’s maintenance explanation illustrates why ownership and responsibility matter. The county directly maintains approximately one-third of its facility inventory, primarily residential dry ponds. Private owners or operators maintain the remaining two-thirds, while the county inspects private facilities at least once every five years.

That county arrangement belongs in a local account plan. It should not be projected nationwide. The stormwater pond inventory guide sets out the site-level records needed to distinguish a basin candidate from a facility whose maintenance responsibility has been checked.

Stormwater capital needs are different from utility revenue

EPA reports a $115.3 billion stormwater total in its 2022 Clean Watersheds Needs Survey, covering capital investment over the subsequent 20 years in January 2022 dollars.

PorchRocket recomputed the national sum from the three components in Table B-3 of EPA’s report to Congress, dated April 2024. The published figures are in millions; the table below converts them to billions.

Stormwater needs component Published total, millions of January 2022 dollars Converted total, billions
Gray infrastructure $59,769 $59.8
Green infrastructure $49,329 $49.3
General stormwater management $6,199 $6.2
Total $115,297 $115.3

Source: PorchRocket’s addition and unit conversion of EPA 2022 CWNS Table B-3. Add the million-dollar components before rounding the displayed billion-dollar total.

The figure describes reported capital needs in January 2022 dollars. Keep that price basis when comparing it with another needs assessment. Annual utility revenue belongs in a separate column, alongside the fiscal year and the portion available for the work you sell.

An estimator can use the report to understand the scale of documented infrastructure needs. To identify an opportunity for this winter, read the local capital plan and find the budget authorization for the particular project. Then check its procurement schedule. A listed need becomes a bid target when the buyer has a funded scope and a purchasing date.

Keep capital projects separate from recurring service in the sales forecast. An owner may buy scheduled vegetation work from one contract and a larger restoration scope from another. Price the work against the plans and access conditions attached to that purchase. The national survey gives no unit price for either job.

What utility statistics say about a maintenance market

A territory decision needs the 2026 utility counts as background and a local facility list that identifies the party responsible for buying maintenance.

I would start with the operator’s asset records and work outward. Identify the facilities already listed, then review the gaps against dated imagery and property records. For each candidate, record what remains unresolved before anyone schedules an estimating visit. The broader aerial asset inventory guide explains that evidence trail.

Keep two counts on the sales board: facilities and buying accounts. One property manager can control several sites. Conversely, neighboring basins can have different maintenance obligations. A site count becomes a revenue forecast only after the account relationship and service scope are established.

For paved sites, use the parking-lot statistics table to understand area estimates and their denominators. At the account level, trace the connection between the paved surface and the runoff-control facility through the approved site plan or the owner’s records. Put that relationship in the estimating file.

For recurring work, build the offer around the required tasks and an accessible route. Pond and basin maintenance contracts need a scope an owner can compare with the inspection record. A property with unresolved access or responsibility should stay in research until that missing field is settled.

For public maintenance purchases, Bid Control by PorchRocket brings notices, bid papers and addenda together so the crew can review a specific contract. Use the owner’s scope and procurement schedule to decide whether to bid. A conversation with Rafael about the public work you want can focus the search on your trade and area.

How to build a stormwater territory plan, step by step

Use eight steps to move from a defined search area to reviewed basin records, with responsibility and access checked before an estimating visit.

  1. Write the inclusion rule. Specify the counties or drive radius, the basin types you service and the access conditions your crew can handle. Separate an inspection prospect from a restoration prospect.
  2. Collect the local starting records. Download available facility inventories and identify the MS4 operator. Put each source’s date beside its records, then check the current utility ordinance or billing page where financing status matters.
  3. Scope an Asset Search pilot. Tell Asset Search what to find, where to search and how your experts define a qualifying basin. Request a small paid pilot credited toward the full order, with per-accepted-result terms when your buying decision depends on accepted sites.
  4. Reconcile sites and accounts. Match candidates to parcels, preserve the original identifiers and group related assets under a site identifier. Record the owner and the source supporting maintenance responsibility.
  5. Review every disposition. Put fits in the estimating queue, keep rejects with their reasons and assign one settling field check to each unresolved candidate. Include those outcomes in the export.
  6. Confirm the visit scope. Ask for the maintenance plan and access instructions before sending an estimator. Record any measurements needed to price the requested work during the site review.
  7. Price a bounded offer. Separate scheduled service from restoration work and define what triggers another estimate. Test travel time in the route-density calculator before adding a remote stop to a recurring book.
  8. Set the refresh decision. Use a quarterly territory review when the decision is account coverage. Request a monitoring subscription when new development or removed facilities would change the sales book, and retain before-and-after dates with each change.

For the first month, I would track why each record stalled. An unclear ownership match needs a different response from a difficult access route. Counting both as unsuccessful calls would hide the work needed to move them forward.

Keep the pilot area small enough to review with the people who price and perform the work. Ask them to read the rejected candidates too. If the search rule excludes a facility the crew could serve, revise the rule before expanding the territory.

What is a better basin inventory worth?

In an in-house planning model, filtering 160 candidate records to 92 qualifying sites cuts a two-hour-per-site estimating schedule from 320 hours to 184 hours.

Assume the starting file contains 18 duplicate records, 22 sites outside the territory and 28 outside the crew’s service scope. Those are mutually exclusive removals: 160 - 18 - 22 - 28 = 92. Removing them before dispatch avoids 136 field hours, or 42.5% of the original visit schedule.

For research and outreach, allow a fixed $1,240 of your own research labor plus 16 outreach hours at a loaded $39 per hour. That budget is $1,240 + $624 = $1,864. Estimating visits, proposal preparation and purchased data are outside this budget. The 136 avoided field hours measure scheduling capacity and are not added to the financial return.

Assume each of the 92 qualifying sites represents a separate buying account. A conservative funnel reaches 75% of those accounts, sends proposals to 25% of the accounts reached, and signs 10% of proposals: 92 x 0.75 = 69 accounts reached; 69 x 0.25 = 17.25 expected proposals; 17.25 x 0.10 = 1.725 expected signed accounts. The fractions express an average across repeated campaigns. The table tests one, two and three signed accounts as separate outcomes, with two as the base planning case.

Assume a signed maintenance agreement produces $3,860 annual revenue and a 32% gross margin after the cost of field work, including travel, leaving $1,235.20 in annual gross profit. Each signed account stays for four full years, with no price increase or discounting: customer lifetime gross profit is $1,235.20 x 4 = $4,940.80.

Case Accounts signed Four-year gross profit Gross profit less $1,864 research/outreach Research/outreach spend per account
Low 1 $4,940.80 $3,076.80 $1,864.00
Base 2 $9,881.60 $8,017.60 $932.00
High 3 $14,822.40 $12,958.40 $621.33

Source: PorchRocket’s stated planning assumptions and calculations, reproduced in the downloadable CSV. The base case signs two accounts from 92 qualifying sites, or 2.2% of that file, rounded to one decimal. Dollar results are rounded to cents.

ROI on research and outreach equals account gross profit over the chosen period, minus that budget, divided by the budget. Here the base calculation is ($9,881.60 - $1,864) / $1,864 x 100 = 430.1%, rounded to one decimal. For full customer acquisition cost, add estimating and proposal labor, purchased data and any other sales and marketing costs before dividing by signed accounts. Enter that full cost in the lead-list ROI calculator, along with your service margin and retention period.

The decision rule is to earn back all acquisition spending within the retention period you use for planning. One account supplies $4,940.80 against the $1,864 research and outreach budget, leaving $3,076.80 for the excluded acquisition costs before reaching break-even. Price those remaining tasks before approving the campaign. Asset Search pricing is scoped to the investigation and agreed result.

I would also check the low case against available crew time. A signed account only adds value at the assumed margin if its route and service requirements fit the estimate. Start with the work your existing truck can perform on a sensible schedule.

Methodology

PorchRocket analyzed the June 2026 WKU appendix and Census Vintage 2025 population file, preserving the source records and applying explicit filters before calculating state comparisons.

The WKU input is the PDF attached to SEAS Faculty Publications 24, with a preface dated May 19, 2026. The script extracts Appendix A only and verifies all 2,202 numbered rows. Canadian and other international appendices are excluded. Thirteen rows whose fee-type code is a hyphen are excluded from the retained-record analysis.

Fee calculations use 1,977 retained rows with dollar-marked numeric fees. Missing fees stay missing; two reported zeros remain. The mean is unweighted. Percentiles use linear interpolation at position (sample size - 1) x percentile, with positions counted from zero. State medians use the same filter, and each displayed value carries its fee sample size.

The appendix’s literal “ERU” code is grouped with “E” for the fee-type table. State counts use the appendix’s state codes. Per-million calculations divide retained counts by Census POPESTIMATE2025 for state-level SUMLEV 040 rows, multiply by one million and round to one decimal. The Census release schedule identifies Vintage 2025 as the latest full vintage, with the next national and state totals scheduled for December 2026.

EPA system counts are published overview figures available in November 2026; their sum is arithmetic rather than a new registry extraction. CWNS totals come from Table B-3 and retain their January 2022 dollar basis. City area-normalized charges and the in-house pursuit model are separate calculations with their inputs stated in the relevant sections.

The WKU narrative says 43 states plus DC, while its appendix contains records coded to 44 states plus DC, including Louisiana; this analysis follows the appendix without certifying those records’ current status. Fee observations can predate publication, and a zero state count records an absence from this list rather than proof that no utility exists. The public-information collection is not a random sample, and overlapping jurisdictions prevent interpreting record counts as service coverage.

The CSV’s method fields preserve the formulas and units beside the results. Its planning-model rows are separate from the public-source statistics. The model’s acquisition-cost fields divide only the stated research and outreach budget by accounts signed; add the excluded sales costs for a full acquisition-cost calculation.

How to cite these statistics

Cite PorchRocket’s 2026 analysis with the statistic’s year, geography and denominator, and retain the source dataset name when reproducing a calculated result.

Suggested citation: PorchRocket, “Stormwater Utility Statistics 2026: 26 Numbers With Sources,” 2026, https://porchrocket.com/stormwater-utility-statistics.

Reuse these tables and calculations with a link back to this page. Download the stormwater utility statistics CSV for the values and methods. Its columns are stat, value, unit, year, geography, source_name, source_url and method.

A citation for a state comparison can read: “PorchRocket’s analysis of the 2026 WKU utility appendix and Census July 2025 population estimates found 39.3 listed utility records per million Minnesota residents.” For a national fee, keep the denominator: “PorchRocket calculated a $5 median monthly residential fee among 1,977 reported fees after excluding repeal-flagged records.”

Keep the observation date beside the page’s November 2026 update date. For capital needs, retain January 2022 dollars; for the fee distribution, identify the 2026 survey and its reported residential fees. A comparison with a local budget should show that budget’s fiscal year and whether its figures are revenue, operating expenditure or capital spending.

PorchRocket reviews the basins in your chosen territory against rules set with your experts, returning dated evidence and a disposition for every candidate. Start with the area and the basin definition your team wants. Asset Search returns location and parcel information, owner information, dated views and observed facts, with fits, rejects and the reason, plus unresolved sites and the field check that settles them. Every disposition comes back in CSV, Excel or a GIS-ready file. Per-accepted-result terms fit a buyer building a service territory; a monitoring subscription fits a utility keeping its inventory current. Begin with a small paid pilot credited toward the full order, then expand the agreed search. Give your estimator a basin record with the evidence needed to choose the next visit.

Questions people ask

Quick answers

How many stormwater utilities are there in the United States?

WKU's 2026 survey lists 2,202 U.S. utility records. PorchRocket's appendix analysis removes 13 rows marked repealed, leaving 2,189 records. Treat that as a count of listed records under a stated filter. The survey compiles public information and does not independently certify every utility's current operating or legal status.

What is the average stormwater utility fee?

WKU reports a $6.33 average monthly single-family residential fee in its 2026 survey. PorchRocket calculates $6.34 after excluding records marked repealed and retaining 1,977 numeric fees, including two reported zeros. The median remains $5. Each utility receives equal weight, so these figures do not describe the average customer's bill or a commercial property's charge.

Which state has the most stormwater utilities?

Minnesota leads the 2026 WKU appendix with 229 listed records without repeal flags. Florida follows with 213. PorchRocket's population comparison also places Minnesota first at 39.3 records per million residents, using July 2025 Census estimates. A state count does not tell you how many ponds an individual utility owns or how many maintenance contracts it buys.

How many MS4 permits are there in the United States?

EPA's published overview lists approximately 855 Phase I MS4 systems covered by about 250 individual permits and 6,695 Phase II systems, mostly covered by general permits. Those system figures do not establish a nationwide total of distinct permit documents. Use the permitting authority's current registry when your question concerns permits rather than systems.

Is there a national count of detention ponds?

Neither the WKU utility appendix nor EPA's program-level MS4 counts provides a national detention-pond inventory. A basin count requires site records with an agreed asset definition and duplicate review. For a local estimate, reconcile municipal facility maps, approved plans and dated imagery, then keep unresolved candidates separate until the specified field check settles them.

How much impervious area equals one ERU?

The utility sets its own unit area. Durham uses 2,400 square feet per equivalent residential unit, while Raleigh uses a 2,260-square-foot single-family equivalent unit. Their July 2026 commercial unit rates also differ. Use the local unit definition, approved rate, rounding rule and applicable credits when checking a property's bill.

Does paying a stormwater fee mean the city maintains my pond?

No. Check the recorded maintenance responsibility for that facility. Fairfax County, for example, directly maintains approximately one-third of its stormwater facility inventory; private owners or operators maintain the remaining two-thirds. The county inspects private facilities at least once every five years. Paying a utility bill does not identify the party responsible for your specific maintenance work.

Can I download and reuse these stormwater statistics?

Yes. Download the CSV linked on this page and cite PorchRocket, Stormwater Utility Statistics 2026: 26 Numbers With Sources, with a link back. Keep the year, geography, sample size and method beside any reused figure. In particular, retain the distinction between survey records, fees, MS4 systems and individual permits.

Research file

Sources used in this guide

Sources are linked at the claim they support and collected here for auditability. Vendor features and prices can change; verify them before purchasing.

  1. Western Kentucky University Stormwater Utility Survey 2026Western Kentucky University: June 2026 report, Appendix A's 2,202 numbered U.S. records, fee codes and residential fees; downloaded and analyzed for this page; checked November 2026.
  2. Census state population estimates, Vintage 2025 releaseU.S. Census Bureau: Confirms January 27, 2026 release and identifies the Vintage 2025 state population files; checked November 2026.
  3. Census population estimates release scheduleU.S. Census Bureau: Identifies Vintage 2025 as the latest full vintage and schedules the next national and state totals for December 2026; checked November 2026.
  4. Census NST-EST2025-ALLDATA raw population CSVU.S. Census Bureau: SUMLEV 040 and POPESTIMATE2025 supply July 1, 2025 state and DC denominators; checked November 2026.
  5. EPA municipal stormwater program overviewU.S. Environmental Protection Agency: Published Phase I and Phase II system counts, Phase I individual permits and general-permit distinction; page updated May 2026; checked November 2026.
  6. EPA small MS4 urban-area designation clarificationU.S. Environmental Protection Agency: 2023 clarification uses urban areas with at least 50,000 people; effective July 12, 2023; page updated September 2026; checked November 2026.
  7. Pennsylvania municipal stormwater programPennsylvania Department of Environmental Protection: Lists one large, one medium and 1,059 small MS4s; also describes current permit administration; checked November 2026.
  8. Raleigh July 2026 stormwater utility feesCity of Raleigh: 2,260-square-foot SFEU and $8.47 commercial monthly unit rate, plus residential tiers and credit explanation; checked November 2026.
  9. Durham July 2026 stormwater utility feesCity of Durham: 2,400-square-foot ERU and $11.80 nonresidential monthly unit rate in the city's July 2026 schedule; checked November 2026.
  10. EPA stormwater maintenance guidanceU.S. Environmental Protection Agency: Maintenance responsibility, inspection schedules, easements, funding and common maintenance activities; checked November 2026.
  11. Fairfax County facility maintenance and inspectionsFairfax County: County maintenance covers approximately one-third of its facility inventory; private owners maintain the remainder, with county inspections at least every five years; checked November 2026.
  12. EPA 2022 Clean Watersheds Needs Survey reportU.S. Environmental Protection Agency: Report dated April 2024, Table B-3 stormwater component totals, subsequent 20-year capital needs and January 2022 dollar basis; checked November 2026.
Your next best move

Find the basins your territory book is missing.

Tell us your area and what counts as a basin worth reviewing. Asset Search scopes a paid pilot and returns reviewed sites with the evidence and owner information your team needs.

Inventory my basins