Privacy choices

Choose what we may use.

The site works without optional tracking. Your choice is saved on this device and can be changed here anytime.

Necessary

Runs the site, protects forms, and remembers this privacy choice.

Always on

Public procurement

Government Contracting Statistics 2026: 32 Numbers With Sources

Size the public market by buyer type and spending category, then check the competition, deadlines and preparation costs that decide which jobs deserve an estimate.

The short answer

PorchRocket's analysis of the Census Bureau's 2026 inventory counts 91,729 local governments. Its analysis of Census finance files finds $573.16 billion in state and local construction spending for FY2024. SBA reports about $179 billion in small-business federal prime awards for FY2025. These measure different markets. PorchRocket's October 2026 Bid Control sample adds contractor-level evidence: a median of three bidders across 725 recorded bid tabulations, plus Texas-specific findings on deadlines and bid packets.

See bids for your trade

What matters most

  • PorchRocket's analysis of the Census Bureau's 2026 listing counts 91,729 local governments, including 40,511 special districts and 12,525 independent school districts.
  • PorchRocket's analysis of FY2024 Census estimates finds that local governments accounted for 66.4% of state and local construction spending.
  • SBA's FY2025 scorecard release reports about $179 billion in small-business federal prime awards, on a different basis from local procurement.
  • PorchRocket's October 2026 Bid Control sample has a 24-day median Texas response window across 6,711 notices and a $187,924 median award across 1,294 eligible award records.

Updated November 2026. The United States has 91,729 local governments in the Census Bureau’s 2026 inventory. That gives a contractor many more possible buyers than the city purchasing office. It does not say how many need a roof replacement, grounds contract or RTU swap this year. Buyer counts, spending totals and bid notices answer different questions.

PorchRocket’s analysis below separates those questions using government records, finance estimates and SBA scorecards. PorchRocket’s Bid Control data (October 2026) supplies the bidding evidence, with a separate denominator for each finding. Bid Control by PorchRocket applies that evidence to public jobs in a contractor’s own trade and territory. The downloadable statistics file preserves the years and methods behind the numbers.

Key statistics

The public market spans 91,729 local governments in Census’s 2026 inventory, while PorchRocket’s October 2026 bid research shows the competition and preparation demands within its recorded sample.

  • PorchRocket’s analysis of the Census Bureau’s 2026 Government Units Listing counts 91,729 local governments in the United States.
  • PorchRocket’s analysis of the Census Bureau’s 2026 listing counts 3,031 county governments in the United States.
  • PorchRocket’s analysis of the Census Bureau’s 2026 listing counts 19,489 municipal governments in the United States.
  • PorchRocket’s analysis of the Census Bureau’s 2026 listing counts 16,173 township governments in the United States.
  • PorchRocket’s analysis of the Census Bureau’s 2026 listing counts 12,525 independent school district governments in the United States.
  • PorchRocket’s analysis of the Census Bureau’s 2026 listing counts 40,511 special district governments in the United States.
  • PorchRocket’s analysis of the Census Bureau’s 2026 listing finds that special-purpose governments account for 57.8% of U.S. local governments.
  • PorchRocket’s analysis of the Census Bureau’s 2026 listing counts 53,036 special-purpose local governments, combining special districts and independent school districts.
  • PorchRocket’s analysis of the Census Bureau’s 2026 listing counts 6,933 local governments in Illinois, the largest state total.
  • PorchRocket’s analysis of the Census Bureau’s 2026 listing counts 5,795 local governments in Texas.
  • PorchRocket’s analysis of the Census Bureau’s 2026 listing counts 1,323 dependent school systems separately from independent local governments.
  • PorchRocket’s analysis of Census FY2024 finance estimates finds $4.23 trillion in state and local current operations expenditure.
  • PorchRocket’s analysis of Census FY2024 finance estimates finds $573.16 billion in state and local construction expenditure.
  • PorchRocket’s analysis of Census FY2024 finance estimates finds that local governments account for 66.4% of state and local construction expenditure.
  • PorchRocket’s analysis of Census FY2024 finance estimates finds $114.93 billion in elementary-secondary education construction expenditure.
  • PorchRocket’s analysis of Census FY2024 finance estimates finds $148.49 billion in regular and toll highway construction expenditure.
  • SBA’s June 2026 scorecard release reports about $179 billion in small-business federal prime awards for FY2025.
  • SBA’s June 2026 scorecard release puts the FY2025 small-business federal prime dollar share at nearly 28%.
  • SBA’s June 2026 scorecard release reports $32.5 billion in service-disabled veteran-owned small-business federal prime awards for FY2025.
  • PorchRocket’s analysis of its October 2026 Bid Control inventory counts 23,386 public bid solicitations across seven states.
  • PorchRocket’s analysis of its October 2026 Bid Control sample finds a median of three bidders across 725 recorded public bid tabulations.
  • PorchRocket’s analysis of its October 2026 Bid Control sample finds one bidder in 20.1% of 725 recorded public bid tabulations.
  • PorchRocket’s analysis of its October 2026 Bid Control sample finds two or fewer bidders in 42.3% of 725 recorded public bid tabulations.
  • PorchRocket’s analysis of its October 2026 Bid Control award-size sample finds a $187,924 median across 1,294 eligible award records.
  • PorchRocket’s analysis of its October 2026 Bid Control award-size sample finds 57.2% of 1,294 eligible awards below $250,000.
  • PorchRocket’s analysis of its October 2026 Bid Control sample finds a 24-calendar-day median response window across 6,711 eligible Texas notices.
  • PorchRocket’s analysis of its October 2026 Bid Control sample finds 40.2% of 6,711 eligible Texas notices close within three weeks of posting.
  • PorchRocket’s analysis of its October 2026 Bid Control sample finds 46.4% of 10,358 Texas deadlines fall at 2:00 PM after conversion to Central time.
  • PorchRocket’s analysis of its October 2026 Bid Control packet sample finds a bid-bond requirement in 77.1% of 638 Texas packets read for that measure.
  • PorchRocket’s analysis of its October 2026 Bid Control sample finds exactly 5% bid security in 77.7% of 291 Texas bid-bond requirements that state a percentage.
  • PorchRocket’s analysis of its October 2026 Bid Control sample finds a document-download login requirement in 42.8% of 11,153 Texas listings.
  • PorchRocket’s analysis of its October 2026 Bid Control sample finds a median of three return forms across 295 Texas packets with that detail.

The public-data calculations use the 2026 government listing and FY2024 finance files. Federal award figures come from SBA’s FY2025 release. The public bid award research supplies the first-party sample definitions. None of these four sources shares a common denominator.

How many government agencies are in the US?

Census’s 2026 inventory contains 91,729 local governments; adding 50 state governments and the federal government gives 91,780 government units, rather than a count of purchasing departments.

Start with the governing unit. A city’s public works department and facilities office can lead back to one purchasing organization, while a utility could be a separate district, so check the legal buyer before treating each office name as another account on the territory worksheet.

PorchRocket counted records in the listing’s general-purpose, special district and school district sheets, then checked the results against the 2026 organization tables. Dependent schools and pension systems stay outside this count.

Local government type U.S. units in 2026 Starting point for a trade contractor’s research
County 3,031 County facilities, roads and purchasing notices
Municipal 19,489 City facilities, public works and maintenance contracts
Township 16,173 The township’s authorized facilities and service responsibilities
Special district 40,511 The district’s specific function and assets
Independent school district 12,525 District purchasing and facilities offices
Total local governments 91,729 A buyer inventory to filter before looking for open work

Source for every count: PorchRocket’s analysis of the Census Bureau’s 2026 Government Units Listing. The research suggestions describe where I would start, rather than a count of advertised opportunities.

Special districts and independent school districts together account for 53,036 units, or 57.8% of local governments in PorchRocket’s calculation. A city-only search therefore leaves out much of the government inventory. For a grounds crew, I would check park-related districts; for a mechanical contractor, I would examine the facilities a district operates before adding it to the watch list.

Census’s file also contains 419 dormant local governments. Its documentation says these units still exist legally and remain in the inventory despite lacking financial activity. We retain them to match Census’s published count. A contractor building a prospecting list should check current purchasing activity before assigning anyone to pursue a dormant unit.

Local government counts by state in 2026

Illinois has the largest 2026 local-government inventory at 6,933 units, followed by Texas at 5,795, according to PorchRocket’s analysis of Census’s government listing.

The table shows the 15 states with the most local governments, sorted by total. The downloadable CSV includes every state and the District of Columbia. These are organizational counts. A high count can mean many small purchasing offices, while a lower count can contain large consolidated buyers.

State Counties Municipalities Townships Special districts School districts Total local
Illinois 102 1,294 1,425 3,223 889 6,933
Texas 254 1,226 0 3,247 1,068 5,795
Pennsylvania 66 1,014 1,544 1,697 514 4,835
California 57 483 0 3,004 1,002 4,546
Colorado 62 273 0 3,643 180 4,158
Ohio 88 923 1,308 993 665 3,977
Missouri 114 940 283 1,951 530 3,818
Kansas 103 624 1,257 1,465 308 3,757
Minnesota 87 856 1,775 575 330 3,623
New York 57 594 930 1,204 676 3,461
Wisconsin 72 608 1,241 694 437 3,052
Michigan 83 533 1,240 436 567 2,859
Indiana 91 566 1,003 696 290 2,646
Nebraska 93 528 337 1,340 267 2,565
North Dakota 53 355 1,304 660 172 2,544

State table source: PorchRocket’s record counts from the 2026 Census government workbook, reconciled to table GS2600ORG02. County governments are a classification of governing units, not a list of every geographic county or county equivalent.

Colorado’s special district column deserves attention: PorchRocket counts 3,643 districts there, within a total of 4,158 local governments. A territory file organized only around city names would have a different shape from the government’s own inventory. Start with the government type that buys your service, then narrow the geography.

Map the work before ranking the state. I would draw a paving company’s service boundary around workable hauling distances, while a janitorial company’s map would depend on the locations it can staff at the required hours and the supervisor travel needed to cover those buildings on the same shift. Record the buyer’s office separately from the worksite address; an agency headquartered inside your radius can advertise work outside it. For the Texas slice, the Texas public-bid board is a closer operating view than a statewide count.

How much do state and local governments spend?

PorchRocket’s analysis of Census FY2024 estimates finds $4.23 trillion in current operations and $573.16 billion in construction, two expenditure categories that must remain separate from contractor sales.

Current operations include government employee compensation as well as materials and purchased services. Under the Census government finance definitions, construction includes work performed by private contractors and work carried out with the government’s own labor and materials, which means a dollar recorded in this category does not necessarily represent a dollar paid to an outside construction company. Neither total measures advertised bids.

The following cuts show where spending is recorded by purpose. All values are FY2024 nominal dollars, expressed in billions. PorchRocket summed the relevant national item-code estimates rather than adding the finances of sampled governments without their survey estimation.

Government function Current operations, $ billions Construction, $ billions
Elementary-secondary education 868.52 114.93
Regular and toll highways 110.97 148.49
Higher education, including auxiliaries 353.87 44.23
General public buildings 13.05 8.57
Parks and recreation 49.55 16.83
Sewerage 54.43 31.80
Water supply utilities 62.68 29.26
Transit utilities 69.03 29.42

Spending table source: PorchRocket calculations from the Census Bureau’s FY2024 state and local finance estimates, file 24statetypepu.txt. These selected rows do not sum to the national total. School or utility buildings remain in their functional categories rather than all appearing under general public buildings.

Local governments account for $380.77 billion, or 66.4%, of state and local construction expenditure in PorchRocket’s calculation. The state component accounts for the balance. For a contractor choosing where to build buyer relationships, that gives a reason to examine local purchasing alongside state procurement.

Use expenditure categories to decide where to investigate. A roofer should not treat the education construction column as a roof-replacement budget. It contains other construction work. A parking-lot maintenance company should not claim the entire highway column as its market. The next evidence needed is a scoped project, a budget line tied to that scope, or an existing contract that covers the service.

Keep fiscal years on the spreadsheet. The finance methodology defines survey year 2024 as government fiscal years ending from July 1, 2023 through June 30, 2024. Census published these estimates in July 2026. Use them to compare spending categories, then read the buyer’s current budget before committing estimating time.

School district procurement statistics

Census’s 2026 listing contains 12,525 independent school district governments and separately lists 1,323 dependent school systems, so a district count cannot serve as a school-building count.

An independent district qualifies as a government because of its administrative and fiscal autonomy. A dependent system belongs to another government. The Census school-finance glossary explains the distinction. For procurement research, the parent relationship tells you where to look next when a school system has no separate purchasing page.

PorchRocket’s analysis of Census FY2024 finance estimates finds $114.93 billion in elementary-secondary education construction and $868.52 billion in current operations. For a school-service territory, pair those spending categories with the buyer records below to identify the work your crew can perform.

Question for a school territory file Record to collect Decision it supports
Is this system independent or dependent? Census classification and any listed parent Which organization to research as the buyer
Where will the crew work? Facilities schedule in the solicitation Travel, staffing and mobilization
What must happen during school breaks? Scope and performance calendar Whether crew capacity fits
What was bought last time? Award notice and the underlying contract Comparable scope and pricing structure
Is the figure a spending authorization or a purchase commitment? Contract quantities and ordering terms How much revenue belongs in the estimate

The organizational distinction is sourced to Census; the record checklist is my research method. I would start with the facilities schedule before studying district enrollment. A district can look attractive by size and still ask for scattered stops that do not fit the crew’s route.

Check the ordering terms. Before putting an annual service amount or a possible renewal value into the sales forecast, I would read what the buyer commits to purchase and work through the labor and mobilization implied by any estimated quantities in the current packet. Send questions before the cutoff. A national spending table cannot supply missing site quantities.

For a building-based view of the surrounding market, compare the commercial building statistics reference page. Its unit is a building. The government inventory’s unit is an organization. The distinction matters when one purchasing office controls several campuses, maintenance shops or administration buildings.

Small business government contracting statistics

SBA reports about $179 billion in small-business federal prime awards for FY2025, representing nearly 28% on its scorecard basis, according to the June 2026 release.

The SBA FY2025 announcement also reports $32.5 billion in service-disabled veteran-owned small-business prime awards and $75.3 billion in small disadvantaged business prime awards. The release cites a 23% statutory overall small-business goal. Retain SBA’s rounded wording when quoting these amounts.

Read the overall share as a dollar measure. A large contract can carry more dollars than many small purchases, so an owner comparing the scorecard with an internal sales report needs to distinguish the share of dollars awarded from the share of submissions won or the number of firms receiving awards. Category labels also overlap; adding category award values would require a treatment of that overlap.

Federal scorecard figures and local contracting figures answer different questions. SBA’s result describes federal prime awards. Census’s expenditure file describes state and local government finances. A city purchase financed partly by a grant still needs to be understood through that buyer’s solicitation and funding conditions; it cannot be added to a federal prime-award total merely because federal money is involved.

For a small trade company, I would compare the contract’s work with the crew’s capacity before treating any participation goal as a reason to bid. Check the eligibility language in the specific opportunity. Then examine the worksite, scheduling obligations and comparable completed jobs. The national small-business share does not supply any of those answers.

Keep one separate line for subcontracting in market research. A subcontractor sells through a prime contractor; a prime award is made to the direct contracting party. The article’s federal figures above concern prime awards. Mixing prime and subcontract values would make a comparison with local prime bid records harder to interpret.

If the decision is what acquiring another account costs, use the contractor lead cost statistics sibling page alongside the award figures. Award revenue belongs on one side of the calculation. Pursuit expense belongs on the other, including money spent on submissions that do not produce a contract.

How many bidders compete for public contracts?

PorchRocket’s October 2026 Bid Control sample has a median of three bidders across 725 readable public bid tabulations, with one bidder recorded in 20.1% of those tabs.

PorchRocket’s October 2026 Bid Control sample records two or fewer bidders in 42.3% of 725 tabulations. The tabulations are concentrated in Texas, and a bid enters this measure only after its tab has been found and parsed.

Three bidders does not make your chance one in three. Before assigning a probability to the next pursuit, I would compare the crew’s delivery plan and cost structure with the work described in the packet, then read the evaluation rules to see how the buyer will consider the offers it receives. The tab counts submissions.

I would use bidder count to decide which past records deserve a closer read. Open the solicitation behind the tab. Compare the base scope and alternates. Check whether the price is annual, per visit or a contract cap. A line-item price and a total contract value cannot answer the same estimating question.

For a thin tab, check the site-visit schedule and specialized requirements in the packet. Record potential barriers beside the prices: a narrow work window, a distant site or equipment the crew would need to rent. Those details help the next estimator compare the job with a new opportunity; they do not establish why other firms stayed out.

The guide to how many bids it takes to win explains how to work from a company’s own qualified submissions. Keep your internal record narrow enough to compare like work: the same trade, similar job size and a service area the crew can cover. A generic win rate becomes less helpful when it combines an annual PM agreement with a major replacement project.

Public contract award sizes by trade

PorchRocket’s October 2026 Bid Control award-size analysis has a $187,924 median across 1,294 records, with 57.2% below $250,000 and substantial differences between trades.

The Bid Control award research limits this cut to live award records valued from $1,000 to $200 million, with most of the records coming from Texas, so I would compare a job with the relevant trade row before reaching for the overall middle value. Median differs from arithmetic mean. Neither is a recommended bid size.

Trade group Bid Control median award, October 2026 Award records in this cut
Paving and concrete $474,502 156
HVAC $186,268 114
General construction $186,120 187
Grounds and landscaping $150,201 134
Electrical $120,018 136

Source for every row: PorchRocket’s October 2026 Bid Control award analysis. Trade tags can overlap, so the row counts are not distinct pieces of a national total.

PorchRocket’s October 2026 Bid Control award-size sample puts 35.9% of 1,294 included awards below $100,000 and 21.3% below $50,000. Start a search at the job size your crew can carry, then compare the relevant trade’s records with available crew hours.

Read the amount’s basis before putting it in a forecast. An authorization to spend up to a stated ceiling can behave differently from a fixed lump sum. An annual service price differs from a possible multi-year value. The document behind an award should settle which amount you are comparing.

I would put expected gross profit beside contract revenue on a bid review sheet. A large award with travel-heavy service can leave less than a smaller job near the shop. Payroll assumptions belong in the estimate; the 2026 trade wages reference is a separate starting point for researching labor costs. Use the staffing and wage requirements in the current packet for the number you submit.

Bid deadlines and response windows

PorchRocket’s October 2026 Texas Bid Control sample has a median of 24 calendar days between posting and closing across 6,711 notices with valid dates.

PorchRocket’s October 2026 analysis of 6,711 Texas Bid Control notices finds that 40.2% close within three weeks and a quarter allow 18 days or less. The clock starts at the buyer’s parsed posting date, before an estimator may have noticed the job.

The operational difference is immediate: finding a job late uses part of the available response window before you have read its requirements. I would record the first internal review date alongside the published date and closing date. That lets the office distinguish a short agency window from a slow internal decision.

Timing measure PorchRocket Bid Control finding, October 2026 Denominator and geography
Median posting-to-due window 24 calendar days 6,711 eligible Texas notices
Notices closing within three weeks 40.2% Same 6,711 Texas notices
Deadline at 2:00 PM in the normalized data 46.4% 10,358 Texas deadlines, converted to Central time
Thursday deadline 29.1% Same 10,358 Texas deadlines

Source for every row: PorchRocket’s October 2026 Bid Control timing analysis. The clock analysis converts timestamps to Central time, including El Paso records; verify the buyer’s stated time zone for any submission.

A submission calendar needs more than the closing time. Add the question cutoff and any required site visit as soon as the packet is read. Addenda can change what the estimator prices, so the person tracking documents needs a way to tell the estimator that the scope has changed.

Set an internal submission target that leaves room for a failed upload or a missing attachment. The margin should reflect your own process and the buyer’s portal instructions. A national percentage cannot tell you how long your file will take to upload. The government bid discovery guide covers building a watch list before the deadline becomes the reason to pass.

Bid bonds, forms and portal requirements

PorchRocket’s October 2026 sample finds bid-bond requirements in 77.1% of 638 Texas packets read for bonds, a construction-heavy sample with its own denominator.

That percentage should travel with the packet count and geography. It is different from a legal rule requiring a bond on every government purchase. Read the current packet for the required security, acceptable form and execution instructions.

Access and submission take separate work. Bid Control’s October 2026 Texas findings use a broad set of listings for document-access requirements and smaller sets of readable packet details for bonds or return forms, so the percentage of listings behind a login cannot be combined with the bond percentage to describe one group of bids.

Packet or access measure Bid Control October 2026 finding Texas sample size
Bid bond required 77.1% 638 packets read for bonds
Performance bond required 46.1% 638 packets read for bonds
Payment bond required 41.5% 638 packets read for bonds
Exactly 5% security among bonds stating a percentage 77.7% 291 percentage-bearing requirements
Account required to download documents 42.8% 11,153 listings
Electronic-only submission 86.1% 1,915 records with submission detail
Median number of return forms 3 295 packets with form detail

Source for every row: PorchRocket’s October 2026 Bid Control packet analysis. The fully read packets favor construction and larger jobs; access and submission measures use broader, different sets of records.

PorchRocket’s October 2026 Bid Control meeting sample finds a pre-bid meeting or site visit in 48.7% of 638 Texas packets, with attendance mandatory in 7.7%. The same packet can appear in more than one requirement category. Assign each task separately even when the visit and bond belong to one solicitation.

I would assign the items that depend on someone outside the office first. A surety’s paperwork and a notary page do not become easier because the estimate is ready. Then check the final bid form against the number the owner approved. The bid bonds explanation is a place to review terminology before reading a specific packet.

Price is also only part of the response in many records. PorchRocket’s October 2026 Bid Control classified Texas sample identifies 47.7% as requests for proposals and 32.6% as classic sealed low bids, across 5,333 classified solicitations. Read the evaluation section before deciding whether the response mainly needs a price schedule or a written service plan.

Expected value of a bid and preparation costs

A bid earns its estimating time when its probability-weighted contract gross profit exceeds its preparation cost; the break-even probability depends on your numbers, not the national bidder median.

Expected value of a bid means win probability multiplied by contract gross profit, minus the cost of preparing the bid. Gross profit here is contract revenue after the assumed direct delivery costs. The calculation asks whether a pursuit deserves time before the office has spent it.

Say a four-truck HVAC service company is considering an $87,350 maintenance contract at a 19% gross margin over the quoted service term. The margin includes direct labor, materials, travel and other delivery costs; assume no renewal revenue. Allow six owner hours at $87 an hour for all pursuit work retained by the company, including pricing and decisions, with no separate travel, outside estimating or submission charges. For a company that bids every week, Bid Team works out to about $200 a bid. Use that allocation as the preparation-service expense.

The arithmetic is $87,350 x 19% = $16,596.50 contract gross profit. Owner time costs 6 x $87 = $522. Total bid cost is $522 + $200 = $722. Every assumption belongs on the review sheet, including the value assigned to the owner’s hour.

Assumed chance of winning Contract gross profit All-in bid cost Expected value after bid cost
Low: 4% $16,596.50 $722 -$58.14
Base: 8% $16,596.50 $722 $605.72
High: 12% $16,596.50 $722 $1,269.58

The downloadable dataset reproduces this calculation. The base row is 8% x $16,596.50 - $722 = $605.72. The three assumed probabilities test how much confidence the opportunity needs to justify the same preparation cost.

Break-even is $722 / $16,596.50, or about 4.4%. I would pass when the evidence does not support that chance, or when cash needs and crew scheduling make the work a poor fit. Positive expected value alone does not tell you whether the company can carry the job.

Bid Team and a per-packet writing service

For comparison, GERC’s published state and local bid-writing schedule starts at $1,250 for an easy bid with at least 30 days’ notice and reaches $2,750 for a rush bid with under seven days’ notice. Each includes up to 15 production hours; larger solicitations require a quote. Match the notice period and response requirements when comparing the service expense.

Holding the model’s owner time and contract margin constant, replacing the $200 allocation with $1,250 changes the base expected value to -$444.28. At $2,750, it becomes -$1,944.28. The service expense is paid on a losing submission too. The cost reduction against those endpoints is $1,050 to $2,550 per bid.

Bid Team costs less than any bid writer, bid consultant, estimating service, in-house coordinator or other done-for-you bid service. Its work includes the forms and working the estimate with you. See the bid-writing service scope, then put your own margin and pursuit costs into the bid ROI calculator.

How to size a government contracting territory, step by step

Build a territory from Census buyer records, then test current opportunities against scope and bid economics; use eight steps to reach a watch list your estimator can maintain.

  1. Define the work and radius. Write the service in the language an estimator can screen: annual rooftop HVAC maintenance, crack fill and restripe, or custodial coverage. Set the service boundary from the shop and the crew’s workable travel, rather than taking an entire state because the count is large.
  2. Pull the government inventory. Use the CSV’s state and government-type rows to see which buyers exist. For an agency-level worksheet, open the underlying Census listing. Keep the identifier and government type so similarly named units do not become accidental duplicates.
  3. Set the trade and territory in Bid Control. Review matching city, county and school opportunities with due dates, bid papers and addenda in one place. Look at past award prices for comparable scope, and put promising buyers on the office’s review schedule.
  4. Resolve parent organizations. A dependent school system belongs to another government. Add that relationship to the worksheet before researching purchasing contacts. Keep the purchasing office separate from the facilities where work would happen.
  5. Inspect the last comparable purchase. Open the award record and the underlying specifications. Record the amount’s basis, service locations and the work included. Leave a blank where the record does not answer a question; do not replace it with a national median.
  6. Price the pursuit before the job. Estimate owner hours and outside preparation expense. Use an explicit gross-margin assumption and a conservative win-probability range. Pass on weak fits before scheduling a takeoff, then preserve the reason for the next review.
  7. Read the current packet into a calendar. Enter the question deadline, any mandatory meeting and the closing time with its time zone. Assign bond and insurance documents to named roles in your office. Send questions to the buyer through the permitted channel.
  8. Review the decisions after submission. Record the bid cost, result and reason when available. Compare qualified opportunities within the same trade and job-size band. Update the next pursuit’s assumptions with your own evidence rather than applying an overall market share as a win rate.

For the first month, I would prioritize a short set of buyers whose work the company can perform with its present equipment and references. Read those buyers’ documents closely enough to learn their price schedules. Expand the watch list after the office can identify a fitting solicitation without reopening every old file.

Track rejected opportunities as well as submitted bids. A pass for excessive drive time differs from a pass because the required visit was missed. The first improves the territory filter. The second identifies a timing problem in the office. Both can reduce wasted estimating hours on the next cycle.

Methodology

PorchRocket rebuilt the government counts from Census’s 2026 unit workbook and calculated spending cuts from its FY2024 published estimates, preserving source files and a reproducible computation script.

The government input is Govt_Units_2026_Final.xlsx in the 2026 listing download. Census’s documentation describes a June 30, 2026 inventory extracted August 13, 2026. The script counts unique CENSUS_ID_PID6 records across the general-purpose, special district and school district sheets. It groups by FIPS_STATE and the government-type prefix, retains dormant units and excludes dependent schools and pension systems from the independent-local total. Counts are checked against GS2600ORG02; the all-government total is checked against GS2600ORG01.

Census released the annual counts on September 24, 2026. The newest inventory is used here even though 2022 remains the preceding full Census of Governments year. The state ranking sorts the derived local totals, including the District of Columbia in the underlying file.

The finance input is 24statetypepu.txt in the FY2024 public-use ZIP, released in 2026. The script reads the fixed-width state code, estimate level, item code and amount. Amounts are multiplied by 1,000 to convert source thousands into dollars. National calculations use state code 00; estimate levels 1, 2 and 3 identify combined, state and local government estimates. Current operations sum E codes; construction sums F codes. Function rows use the matching suffixes, combining 44 and 45 for highways and 16 and 18 for higher education.

Shares divide the relevant part by its stated total and round to one decimal place. Spending tables round nominal dollar amounts to two decimal places in billions; the CSV retains dollar amounts. The script also reproduces the labeled bid-economics calculations. It republishes SBA’s rounded values and the vetted October Bid Control summary values, rather than claiming to recompute their underlying records.

The Texas response-window cut includes notices posted on or after October 15, 2025 with a due date after posting. The deadline-clock cut includes known times on deadlines from October 15, 2025 through February 15, 2027, all converted to Central time. October 2026 identifies the Bid Control snapshot, not the year of every underlying notice. The form-count measure includes packets with no stated forms as zero, following the data pack’s extraction rule.

Finance figures are survey estimates that include government-performed work, rather than a measure of private procurement. Bid Control’s discovered-record sample is concentrated in Texas, with construction-heavy packet reads; tab parsing can occasionally count a duplicate row. Each bid statistic retains its own denominator and describes the snapshot rather than national win probabilities or currently open jobs.

How to cite these statistics

Cite PorchRocket for the derived Census tabulations and first-party Bid Control findings, retaining the underlying agency, reference year and sample size when quoting a statistic elsewhere.

Suggested citation: PorchRocket, “Government Contracting Statistics 2026: 32 Numbers With Sources,” 2026, https://porchrocket.com/government-contracting-statistics

Reuse the statistics with a link back to this page. Download the government contracting statistics CSV for the columns stat, value, unit, year, geography, source_name, source_url and method. State rows allow readers to make their own territory comparisons without extracting numbers from the article’s display tables.

Keep the qualifier in the sentence. For example: “PorchRocket’s analysis of Census FY2024 estimates found that local governments accounted for 66.4% of state and local construction expenditure.” For a first-party finding: “PorchRocket’s October 2026 Bid Control sample recorded a median of three bidders across 725 public bid tabulations.” Those formulations carry the source and scope when quoted on their own.

From government counts to Bid Control opportunities

Bid Control narrows public-work research to a contractor’s trade and territory, Bid Builder helps prepare the forms, and Bid Team works the estimate and packet with you.

Start with the Bid Control board for matching jobs and due dates. Review the bid papers and addenda beside the opportunity. Check past winners’ prices against comparable scope. Use Bid Builder to work through return forms from the Bid Passport company file. With Bid Team, Rafael’s team fills every form, including the bid form, W-9, affidavits, conflict disclosures and references, and handles insurance and bonding paperwork plus notary pages. We work quantities from plans and specifications and line-item pricing with you, review supplier and subcontractor quotes, and track portal accounts, addenda and deadlines. You make the final call on your number, sign and send. A free 15-minute call with Rafael can start with the trade you perform and the buyers you want to reach.

Bring the territory and the crew capacity; we help you choose and prepare the bids worth pursuing.

Questions people ask

Quick answers

How many government agencies are there in the United States in 2026?

Census counts 91,729 local governments in its 2026 inventory. Adding 50 state governments and the federal government gives 91,780 government units. That does not count every department, procurement office or facility separately. A federal department belongs to the federal government, while a city can contain several departments buying different services.

How much do state and local governments spend on construction?

About $573.16 billion for FY2024, according to PorchRocket's sum of construction item codes in Census's published state and local finance estimates. Local governments account for $380.77 billion, or 66.4%. Construction includes government-performed work as well as private contracts, so the total cannot be treated as the value of advertised contractor opportunities.

What percentage of federal contracts goes to small businesses?

Nearly 28% on SBA's FY2025 prime-contract scorecard basis, representing about $179 billion, according to its June 2026 release. This is a dollar-share measure rather than the percentage of individual contract awards. It describes federal procurement and does not establish the small-business share of city, county or school purchasing.

How many bidders does a government contract usually get?

Three is the median in PorchRocket's October 2026 Bid Control sample of 725 recorded bid tabulations. The sample is concentrated in Texas and comes from bids with readable tabs. Bidder count is a starting point for reviewing competition; estimate your own chances from eligibility, scope, past pricing and the buyer's evaluation method.

What is the average government contract worth?

The median is $187,924 in PorchRocket's October 2026 Bid Control size sample of 1,294 awards between $1,000 and $200 million. At least half the values are at or below the median and at least half at or above it. This differs from an arithmetic average; the sample is heavily concentrated in Texas.

How long do contractors have to respond to public bids?

A median of 24 calendar days in PorchRocket's October 2026 Texas Bid Control sample of 6,711 notices with valid posting and due dates. In that sample, 40.2% close within three weeks. Read each solicitation for its own question cutoff, site visit and submission time before assigning estimating work.

Does every school district count as a separate government buyer?

No. Census's 2026 listing contains 12,525 independent school district governments and lists 1,323 dependent school systems separately. Dependent systems belong to a parent government and are excluded from the independent-government total. Neither count measures individual school buildings, and the parent relationship matters when locating the purchasing office.

Can I download and reuse these government contracting statistics?

Yes. The downloadable CSV records each statistic with its value, unit, reference year, geography, source and method. Cite PorchRocket for the derived tabulations and Bid Control findings, and retain Census or SBA attribution for the original public data. Keep sample sizes and geography with any quoted bid statistic.

Research file

Sources used in this guide

Sources are linked at the claim they support and collected here for auditability. Vendor features and prices can change; verify them before purchasing.

  1. 2026 Government Units ListingU.S. Census Bureau: Independent government records, dependent school systems and documentation of dormant units; released September 24, 2026; checked November 5, 2026.
  2. 2026 Government Organization TablesU.S. Census Bureau: Tables GS2600ORG01 and GS2600ORG02 cross-check the government counts and state tabulations; checked November 5, 2026.
  3. 2026 government organization release noticeU.S. Census Bureau: Confirms the September 24, 2026 release and the annual counts between Census of Governments years; checked November 5, 2026.
  4. 2024 State and Local Government Finance public-use filesU.S. Census Bureau: July 2026 release; national and state estimates in 24statetypepu.txt support the spending calculations; checked November 5, 2026.
  5. 2024 finance survey methodologyU.S. Census Bureau: Sampling, estimation, fiscal reference periods and limitations of finance data; checked November 5, 2026.
  6. Government finance glossaryU.S. Census Bureau: Definitions of current operations, construction, direct spending and intergovernmental transfers; checked November 5, 2026.
  7. School finance glossaryU.S. Census Bureau: Independent school district governments and dependent school systems have different organizational status; checked November 5, 2026.
  8. SBA FY2025 procurement scorecard releaseU.S. Small Business Administration: June 25, 2026 release reports rounded small-business federal prime award amounts and shares; checked November 5, 2026.
  9. Published state and local bid-writing feesGERC Consulting: Official comparison source lists $1,250 to $2,750 per state or local bid by scope and notice, with a 15-hour production allowance; checked November 5, 2026.
  10. Government inventory raw workbook and documentationU.S. Census Bureau: Downloaded input contains Govt_Units_2026_Final.xlsx and its data dictionary; checked November 5, 2026.
  11. Finance raw files and record layoutsU.S. Census Bureau: Downloaded input contains 24statetypepu.txt and technical documentation specifying thousands of dollars and estimate levels; checked November 5, 2026.
Your next best move

Find the public jobs your crew can deliver.

See trade and territory matches, bid documents and past award prices in Bid Control. Bring Rafael's team into the estimate and packet when you want help preparing the response.

See bids for your trade